Hey, We Hope You Enjoy Ou Newest Addition, You Only See 10% Here On Makerworld, So Head Over And Check Out Our Patreon Community!

patreon.com/DENUSA

We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 192x240mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 192x240mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA Overture Purple Transmission Distance: 1

PLA BambuLab Basic Pink Transmission Distance: 8

PLA BambuLab Basic BambuLab Green Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Purple

At layer #13 (1.12mm) swap to Pink

At layer #19 (1.6mm) swap to BambuLab Green

At layer #21 (1.76mm) swap to Jade White for the rest.