Hey Everyone, This Is A Community Requested Project On Our Patreon, We Really Hope You Enjoy It, Join And Subscribe To Make Suggestions! Link In Bio!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240.03x240.03mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Orange Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Jade White

At layer #13 (1.12mm) swap to Red

At layer #21 (1.76mm) swap to Orange for the rest.