Hey Everyone! Hope You enjoy this newest project.

We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).

The Second version is just the STL, the information will be below

If changing size, only change X and Y. Do not change Z

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.65x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Matte Pine Green Transmission Distance: 1

PLA BambuLab Matte Dark Brown Transmission Distance: 2

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Pine Green

At layer #11 (0.96mm) swap to Dark Brown

At layer #13 (1.12mm) swap to Yellow

At layer #15 (1.28mm) swap to Jade White for the rest.