Fan Art fun depiction of Super Mario Art for the Wall - Hueforge
3rd piece tonight is a picture of Mario.
For this model: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 130.91x210mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #10 (0.88mm) swap to Dark Red At layer #17 (1.44mm) swap to Ivory White for the rest






















