Set 3 from week 32. This is a different set. They are carved designs which kind of took on a life of their own.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Transmission Distance: 0.3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Dark Brown At layer #13 (1.12mm) swap to Orange At layer #17 (1.44mm) swap to Yellow for the rest.