Introducing the Ultimate Lid Extension for Your CREALITY K1 MAX 3D Printer! (no supports needed)

Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 MAX printer, designed to elevate your printing projects to the next level.

After the many requests to design a raiser for the K1 MAX, we complied and thought about how we could realise the raiser for the K1 Max.

As with our raiser for the K1 & K1C, there will be several versions. This is version 1,

We have designed two different versions: Version 1 (this one, without SWING-ARM) Version 2 (this one, Upgraded version with SWING-ARM, for advanced users) --> https://than.gs/m/1224360

OUR STL FILES OFFERS YOU:

• Perfect Fit on Creality K1 MAX
• Enhanced Functionality
• Improved Print Quality
• Easy Installation
• Noise reduction
• More moving space for the Bowden tube
• The glass holder makes it easy to work on the extruder or change the filament
• Air supply regulation & indirect control of the temperature
• Bowden tube passage to the back and side (you can choose)
• Detailed assembly instructions are supplied as a download
• Detailed print settings are supplied as a download

THE FOLLOWING PARTS MUST BE PRINTED:

• PART_RAISER_K1-MAX (3 times)
• PART_BACK-RIGHT_RAISER_K1-MAX (1 time)
• GLASS_HOLDER_K1-MAX (1 times)
• SLIDER_K1-MAX (8 times)
• SLIDING-CONTROLLER_WITHOUT_LOGO_K1-MAX (8 times) or SLIDINGCONTROLLER_WITH_LOGO_K1-MAX (8 times)
• PLUG (1-2 times)
• PLUG_WITH_HOLDER (1 time)

PRINT SETTINGS (Please read the INSTRUCTIONS and the PRINT SETTINGS)

• Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary)
• Nozzle: 0.4mm
• Infill: 15% (Gyroid or Grid)
• Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer height)
• Walls: 2
• Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing)
• Recommendation: BRIM with 5 lines

NOT QUITE SURE IF YOU WANT THE RAISER YET? GET AN OVERVIEW WITH OUR DETAILED MOUNTING & PRINTING INSTRUCTIONS: https://sektor7.studio/creality-k1max-k1-max-raiser-top-cover-upgrade-version-1/#lepopup-k1max-v1-instructions

We have designed two different versions:

• Version 1 (this one, without SWING-ARM)
• Version 2 (this one, Upgraded version with SWING-ARM, for advanced users) -->

Both versions have their advantages, choose the one you like the most!

More Upgrades for the Creality K1 Series you will find here in the collection:

• https://than.gs/c/28168

Do you want to download all our Raiser versions? Or sell the printed physical products? Then use our subscription on Thangs :)

If you have any questions feel free to contact us. You can contact us under the following email:

• support@sektor7.studio

We are happy about every new follower.