This model makes use of Bambu Lab's Lamp Kit, but should accommodate any light source you have available to you

It's a friggin' LIGHTHOUSE! PRINT IT FOR YOUR OWN SANITY!

This cute lighthouse was designed after the same style that my Cozy Cabin was designed. Print it. Assemble it. Do the things and accomplish the stuff!

Assembly Instructions: Refer to the attached guide for assembly or Watch this video (The Deck trusts are already attached in the video. You'll have to glue them in)

Printing Instructions:

All parts should be oriented in the way they were intended to be printed.

Several components of this lighthouse utilize the "color swap" technique to mimic the capabilities of a multi-color printer. Anyone with a printer with pause capabilities can do color swaps.

No supports needed!

When printing the reflector, choose a filament that reflects like white or silver.

There are 3mf files included that were created from Bambu Slicer that already have the settings below applied.

Window frames and Door frame (Windows and Door.3mf):

• Layer Height: 0.1mm
• First Layer Height: 0.1mm
• Pause at Layer 3 for color swap

Top Windows:

• Layer Height: 0.2mm
• Wall Generator: Aracne

Top Window Frame:

• Layer Height: 0.2mm
• Wall Generator: Aracne

Everything else:

• Layer Height: 0.2mm

Don't be afraid to give me feedback if you feel something can be improved!

For those who are curious: Rock Base: Polymaker PolyTerra Cappuccino PLA Top windows: Protopasta translucent white PLA

Feel free to join my discord for additional support, questions, or suggestions!