bpitanga241 followers

Multiboard - Parametric Bottle Holder 3d model

Multiboard - Parametric Bottle Holder

2.1K downloads · 2 years ago · This a remix of this great design: https://www.printables.com/model/859943-multiboard-parametric-bot

Description

This a remix of this great design: https://www.printables.com/model/859943-multiboard-parametric-bottle-holders

I did this remix because the original one uses pegboard click mounts which demands supports for printing. This version uses Multipoint rails, so it can be printed without supports in the provided position.

I've included Fusion 360 parametric files in two versions: one for large bottles (uses two rails on the back) and other for small bottles (uses a single rail). One of the parameters controls the bottle size (named "BottleSize") and the other controls the height of the part (named "HolderHeight"). I do not recommend lowering that last parameter too much or you'll break the model. I've also included two STLs, one for 90 mm diameter bottles (two rails) and another for 45 mm bottles (single rail).

When mounting the single rail version on Multiboard tiles, I recommend using two consecutive Multipoints vertically to avoid the holder spinning.

License: https://www.multiboard.io/license

Tags:

Discussions

Draob1 year ago

I am trying to open the fusion files to make a 95mm glue bottle holder, but fusion won't open the files. I think an update to fusion broke comparability?

robert.sink1 year ago

I created a new project in 360 and uploaded the .f3z files, then I was able to open them in that project.

glittalogik1 year ago

There are so many janky attempts at similar holders with suboptimal printing orientations or needing supports for the connectors. Thank you for doing this with a sensible MultiPoint solution and double thank you for the super-pro parametric files, they're a pleasure to work with :)

Knocking off a test piece (75mm single-rail) right now and then probably a dozen more for our garage spraycan collection, will post pics once it's done.

glittalogik1 year ago

P.S. Do you think it'd be feasible to design an easily printable MPslot-to-MPrail angle wedge adaptor to put between these and the board?

I've seen some all-in-one angled holders and I like the space savings but they suuuuck to print 😅

ArkansasModeler3 months ago

I've made a number of holders and they work very well. Thanks for a great design! I have only one request. When modifying the holder height, it cuts off the top of the model. Rather, it would be more useful if it would reduce the height from the middle so that the holder would still connect to a rail slider or multi-points.

thalles.rigobello7 months ago

Wich multibin rail bin should I use? I've tried this one, but It was to Smal to the bottle holder. https://thangs.com/search/%22MP13%22%20creator%3A%22Keep%20Making%22?view=grid&searchScope=thangs

ArildEugen11 months ago

Which screw bolt should I use to connect with bottle, holder?

ed.salisbury1 year ago

Loving this design! Do you have a source for the OXOI rail, or did you make it yourself from the provided rail? I'd like to make taller versions of this design, so would like a little more rail, and an OXOXOI would be better - just asking before I make one myself :)