Polaris Star Christmas Star

115 downloads · 2 years ago · Hey, For this one, you need to print 30 Pieces in total. Watch my [Video](https://youtu.be/h7Y8Qym

This model is restricted by licensing terms.

View license.

Description

Hey,

For this one, you need to print 30 Pieces in total.

Watch my Video on which ones you want to print and how to assemble them. https://youtu.be/h7Y8QymU8qc

Print settings: If you want to use this as a lamp, print it in white Filament. No supports. Depending on your printer, you might need a brim. I didn't need one on my Bambu Lab A1

Parts Used: I used this battery powered LED to turn this into a lamp. https://www.amazon.de/dp/B0BLYQGD2Z?ref=ppx_yo2ov_dt_b_fed_asin_title If you buy something similar, please ensure that the LEDs don't heat up before you put it inside the Star. That way, you won't burn your house down.

This is the Rope I used. https://www.amazon.de/8MM-Nylonfaden-Transparent-Reißfest-Durchsichtige/dp/B0CQVS1TG5/ref=sr_1_24?__mk_de_DE=ÅMÅŽÕÑ&crid=TOG6Z31JFDJK&dib=eyJ2IjoiMSJ9.tMRrCP11zllDaLIysz6i5hjfA_9CRKkFsUjmqWQygG1rI3FKWdjs5zg2h_kytdoEl3JsZeBQMFzxIJyWHUnXoJMGHB_fK1CaKY-ZWiRjOx4V1BCRuaG12VYp166VtprYmkQbwGKscHuZaxP3FyQNyaAr-1q9zY_Ab2ABrDeG1Z9GktMDONgGaCBtjr_pV7Hzgi8lZF9A9N2Nx3bltVos3W_VrMiJmU2mVsAUiemSYMO8a6UqVqs4NARAxBnqgiR3LvYF5U0mxYFgotNCiAoNkWkMYODAFqlqeEigS0ahOvw.gzEm-6FhuWw1vSR_vHDlGY7Vg5CeuT26jRNt0-yyTRk&dib_tag=se&keywords=nylonfaden&qid=1731774873&sprefix=nylon+faden%2Caps%2C97&sr=8-24

Tags:

Community Makes (3)

East to print and assemble 👍 I used Ziro transparent glitter filament and string lights for lightning. Very cute!

Printed on the MK3.5 in CookieCad Witchcraft PLA.

This beautiful star is printed in crystal pla from 3DHOJOR. Ruven bals gave me the advice to print it in 10 walls. (It dont print actually 10 walls) At some point you need focus and patient to assemble it. In total i broke 2 parts. I think its better not to use Polyterra but polylite instead, if you are gonna use Polymaker. Or if you want to use esun, better pla+. The light i bought from action (store in the EU) you can also buy on amazon these kinda lights. I am happy with the result!

Community Makes (3)

Discussions

Coco3D2 years ago

This beautiful star is printed in crystal pla from 3DHOJOR. Ruven bals gave me the advice to print it in 10 walls. (It dont print actually 10 walls) At some point you need focus and patient to assemble it. In total i broke 2 parts. I think its better not to use Polyterra but polylite instead, if you are gonna use Polymaker. Or if you want to use esun, better pla+. The light i bought from action (store in the EU) you can also buy on amazon these kinda lights. I am happy with the result!