3D Print Files in STL format of Shadowheart's Spear of Night/Evening

The opportunity to make this spear arose when @katiesimrell reached out to us to help her with her upcoming Shadowheart cosplay and I was happy to get back to BG3!

The spear is going to have 2 versions: the Standard and Simrell Version. The Standard spear stands at about 6'6" and uses a 1/2" diameter dowel through the center. The Simrell version stands shorter at 5'5" tall and has a fully printable interior reinforcement core. Both versions are capable of screwing apart into smaller pieces post-finishing.

The printable reinforcement core uses 13 modeled pieces that can be inserted inside the spear to help strengthen it without needing a very long dowel - perfect for traveling and breaking down into smaller parts. It's recommended to print these cores laying down flat and at a very high wall count.

Both versions also use a 2mm diameter metal dowel to reinforce the star emblem and spear tip. These dowels are also used to connect the pre-cut parts for smaller printers of the Standard spear.

Bambu Studio Project and GCODE files are also included for both versions!