Sliding Dovetail Attachment for The Rail 3d model

Sliding Dovetail Attachment for The Rail

1K downloads · 2 years ago · This is an attachment for [The Rail](https://thangs.com/designer/LoftedGoods/3d-model/The%20Rail-114

Description

This is an attachment for The Rail that allows you to attach any of my existing planters (except the Heywood, will be updating that one soon).

All of my wall mounted planters come in two sizes (2.75" and 4.5"). I've included attachments for both sizes.

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the dowel and sliding dovetail on the planters.

Orientation Both attachments should print upright, with the flat part on the build plate. The set screws print with the threads facing up.

Print Settings .2mm layer height 15% grid infill (99% for set screws) 2 walls

Filament & Hardware Filament: Bambu Lab Ivory White Matte PLA

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Tags:

Discussions

j.p.7 months ago

could also not manage to get the screws working, the hole is too tight...or screw to wide, it get's stuck right after half/nearly a whole turn of the screw. Any hints for slicing settings?

maxelman11 months ago

I could not get the set screws to work. Decided to give up on the rail and switch to Command strips instead.

dustinwitt25 days ago

The Screw need to me longer. When i Screw it in.... its the same level with sie inlay :(

mikanov2 months ago

I like the idea of this dovetail mount rather than the one with the hidden lock. But there is a problem. The screw is not long enough and are not reacing the dowel. Its sadly not working :(

surlaw9224 months ago

Please could you update the picture for this and make it more clear in the description that this is for the ATTACHMENT not the rounded planter as shown in the image. I downloaded this by accident and wasted a download