Third art piece this evening. A fun little cat dressed in Halloween Attire.

For this Model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

The Model is 112.94x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #5 (0.64mm) swap to Gray At layer #9 (0.96mm) swap to Orange At layer #14 (1.36mm) swap to Jade White for the rest.