Multiboard Heavy Duty Keyhole Hanger
Keyhole slots are on the back of a lot of wall mountable equipment. These are a set of strong Keyhole Hangers for for use with the Multiboard system.
I needed something a little stronger then just plastic pegs in the Keyholes. These holders are strong and can hold a good amount of weight and pull down torque.
10mm length screws seem best.
It comes with Mid Thread and Big Thread mounts. Mid Thread supports M3 and M4 screws. Big Thread supports M4 and M5 screws.
There are Heatset inserts holders and Screw holders
Heatset Inserts:
- M3 Heatset should be M3x6x5
- M4 Heatset should be M4x6x6
- M5 Heatset should be M5x6x7
Blue Thread Lock will hold the Screws using the Heatset inserts into place.
Screw holders allow you to self tap a screw just by screwing it in.
Print as oriented with no supports and standard Multiboard settings (3 walls, 15% infill)
Multiboard Heavy Duty Keyhole Hanger
Multiboard Keyhole Hangers Pegs
Bag Coat Hanger (Heavy Duty Version) Batman
.jpg&w=3840&q=75)
Foldable Bag Hanger – Heavy Duty Table Hook for Backpack & Purse
Heavy Duty Hanger With Adjustable Bolt
Heavy Duty Tile Shelf #1 - Multiboard Pack (+ Video Tutorial)
Heavy Duty Dewalt DCB118 Charger Mount.stl
Double Sided Snap (Part A) - Keyhole Hanger - DS Snap Gen (P) v36.stl
Heavy-Duty 6.25mm Offset Snap (Mid-Threaded)
Ultimate Heavy-Duty Workshop Cabinet (1/18, 1/24, 1/64 Scale)
Scania S730 V8 - 3D Printable STL Model - Heavy Duty Truck
Bambu AMS Shelf & Plate Holder for Multiboard Heavy Insert Bracket
Heavy-duty multipurpose hook
Coupling - Cardan - Heavy Duty Double Universal joint (Acople - Cardan - Junta Universal Doble Traba
13.3” Tablet Protective Case – Heavy Duty Rugged Cover
Multiboard - Cubicle Hanger
3D Printed Heavy Duty Gear Box Loadout Version
Hook-Heavy Duty for jacket
HEAVY DUTY SHELF - 235x20mm
Direct Drive mod for CR-10 Heavy Duty customisable modular e3D V6 mount
Great design, super strong. Thank you! I find the big threaded ones are too long, and could easily have only 50% of the threaded length... so I generally just cut this length off in the slicer before printing.
Thanks, and thanks for the suggestions. I added some Short Big Thread models to help. Great idea.
Worked great for a dewalt battery charger. Used 4 and now have a flat and stable mount for it. Thanks!