These are the window board pieces for the magnetic tile haunted house.

I designed these to be used with 6x2 neodymium magnets. I strongly recommend using these size magnets. When inserted into the print, these magnets do not have space within their 'chambers' to rotate. These window board pieces (as well as the light base piece) are the only pieces designed this way BUT all the other magnets in my designs rotate so they will orient to the magnets in these pieces.

3D Print Settings PLA Filament Layer height 0.2mm Infill 15% No brims or supports needed Neodymium magnets needed: 6x2 Magnetic build plate highly recommended but not absolutely necessary.

Here is a link to Amazon for the light and magnets that fit into this print. That's it:) https://www.amazon.com/shop/3dpmom

For these window boards, add a pause print at layer height 2.8mm to insert the magnets. When the print is paused insert the magnets. After the magnets are inserted, resume the print.

I have also included a 3mf print profile with the following print plates: Print Plate #1 (Window Boards 1-3): one color, pause inserted at layer 14 (layer height 2.8mm) Print Plate #2 (X-Shaped Window Boards 1-3): one color, pause inserted at layer 14 (layer height 2.8mm)

Have fun printing!