Nissan Leaf Radio DIN Mounts
2 downloads · 2 years ago · 3D print models to mount an aftermarket radio in a Nissan Leaf. Measured, designed and installed in
3D print models to mount an aftermarket radio in a Nissan Leaf. Measured, designed and installed in my 2015 Nissan Leaf S
Downloads should be the bare plate and the same plate with holes in it for the radio I installed.
OrangePi 5 Plus DIN mount
Nissan Leaf Overhead Lights Mod
orbitool usb adaptor horizontal din mount
DIN mount parts for OpenEVSE
Gmrs radio mounts
Anet A8 PSU DIN Rail Mount
99-00 Civic Single Din Radio Gauge Pod
Dig-Octa Brainboard-32-8L DIN mount
Dig-Octa Brainboard-32-8L DIN mount (slim)
3 x Wago 222-413 DIN Mount
DIN mount Wago 222
Sonoff Basic DIN Mount Voron Remix.stl
IEC 62196 Type 2 plug holder and Nissan Leaf charged holder
IEC 62196 Type 2 plug holder and Nissan Leaf charged holder
Nissan Leaf charge port gutter flap
Fysetc Spider Mount (DIN-Rail)
Voron DIN Rail SSD Mount
Goldwing CB radio mount cupholder
Shelly DIN Mount with Wago 221 (Shelly Dimmer 2 & Shelly Plus 1PM)
If people use a 3D printed mount be careful. Nissan didn't connect the ground terminal in the 20pin connector on the head unit so it gets ground from the chassis of the stereo itself, which is connected via the bracket to the top right screw that mounts it. If you use this, get a ground wire from the new unit to a screw post and attach when screwing in the top right corner.