Cracked Spiral Planter

1K downloads · 2 years ago · This design is a little different than my other planters but I'm really liking it! The spiral patter

Description

This design is a little different than my other planters but I'm really liking it! The spiral pattern looks like it's been eroded or chipped away, revealing a classic pot underneath.

These can mount to your wall using command strips or screws and feature a hidden, twist off drip tray.

Two sizes available (2.75" and 4.5") and two variations for each size (wall mounted or tabletop).

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament & Hardware Filament: Bambu Lab Latte Brown Matte PLA Hardware: Command Medium Picture Hanging Strips #10-12 x 1-1/4 in anchors and screws

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Tags:

Community Makes (2)

used marble filament to distinguish the mount; prayer plant inside

Used Polyterra Army Blue. Will try out bambu Matte Dark blue to see the differense soon.

Community Makes (2)

Discussions

william.heimbigner1 year ago

used marble filament to distinguish the mount; prayer plant inside

MaterialPETG

Layer height0.2 mm

Material BrandsCalifornia Filament

Material ColorsWheat

rramerongen1 year ago

Used Polyterra Army Blue. Will try out bambu Matte Dark blue to see the differense soon.

PrinterBambu Lab P1S

MaterialPLA

Layer height0.2 mm

Infill density15 %

SupportsNone

seanjogrady9 months ago

love the design, but Im having trouble getting the drip try on and off, with ease. its actually really hard to remove it / attach it. advice ??

teridivi992 years ago

Hey! I absolutely love the design, just printed in marble. I do have an issue with the inside of it though - while the slope on allows for a much smoother surface of the print around those lines where in the older designs you’d have top layers, I’m struggling to place literally any pot on the inside of it so that it stays stable. Also, due to the slanted walls, some of the inner pots I’ve purchased that fit into your older models simply don’t fit anymore. A bit disappointing :((