Hey Everyone, Hope You All Enjoy This Newest Addition- Black and White La Catrina

OUR WHOLE COLLECTION IS AVAILABLE FOR PERSONAL AND COMMERCIAL USE THROUGH SUBSCRIPTION TO OUR PATREON. You Only See 10% Of Our Collection Here On Thingiverse!

https://www.patreon.com/DENUSA

We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).

The Second version is just the STL, the information will be below

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 192x235.38mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Gray Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #11 (0.96mm) swap to Gray

At layer #16 (1.36mm) swap to Jade White for the rest

Print Settings Printer brand: Bambu Lab

Printer: A1

Filament brand: bambu

Filament material: PLA

Notes: Follow Instructions In Description.