.gif&w=3840&q=85)
.gif&w=256&q=75)
Mechanical Dice - fully 3d printable - no external parts
I invite you to join my Telegram group (Entries are limited - don't miss this opportunity): https://t.me/+cu1hYjl2iT9iZjI0
Thank you for visiting my page! If you can, please consider supporting my art with a subscription. Members will unlock ALL of my designs as well as the commercial rights to sell physical prints for as long as they are members.
_I also invite you to join my Discord channel, whether you're a reseller or a fan. You'll find a dedicated space where you can communicate directly with me and other members: https://discord.gg/pUW67mEFrb
YES/NO VERSION DOWNLOAD HERE: DOWNLOAD
- Do not change the orientation of the parts.
- I printed with PLA at 0.2mm/layer.
- Use high-quality PLA - avoid matte PLA as it is not very flexible, especially for the spring. **- Let the parts cool down well before assembling everything – if you’re in a hurry, place them in the freezer before assembly – assembling with hot parts and stressing the spring and trigger will alter the tolerances – don’t do it. **
REMEMBER THAT ALL MY FILES ARE PROTECTED BY A CC LICENSE AND ARE NOT INTENDED FOR COMMERCIAL PURPOSES UNLESS YOU HAVE SUBSCRIBED TO A MEMBERSHIP PLAN ON THANGS - IF YOU USE MY 3D FILES FOR COMMERCIAL PURPOSES, YOU HARM MY WORK AND MY COLLABORATORS - DON'T DO IT!
Warning: The content in question is protected by a Creative Commons license that does not allow the creation of derivative works or remixes. This means that it is not permitted to modify, transform, or further develop the material in any form. Make sure to comply with the terms of the license to avoid copyright violations.
How do I take such high-quality photographs? Here's my equipment:
Camera: https://amzn.to/3RPDj2c Lightbox: https://amzn.to/4btNvV0 Tripod: https://amzn.to/3L51fuT
Mechanical Dice - fully 3d printable - no external parts
.gif&w=3840&q=75)
Shy Fingers - mechanical hand gesture - fully 3d printable
.gif&w=3840&q=75)
3D-printable Valentine’s gadget / fidget
.gif&w=3840&q=75)
JAWDRIVE – Talking Heads Series #1 - Donald Trump
print-in-place planetay gear clamp
Mechanical Dice Gun Spinner
Small Mechanical Counter - Fully 3d printable
.gif&w=3840&q=75)
Clapping Hand Syringe
Rock Syringe - Fully 3d printable
Go Away - Mechanical Italian Gesture - Fully 3d printable
.gif&w=3840&q=75)
Italian mechanical gesture – fully 3D printable fidget toy
Mechanical counter - Naked version
Fully 3D Printable Tiny Toy Gun - (x4 Round - semiauto) - v2
Fully 3D Printable Tiny Toy Gun - (x6 Round - semiauto) - v2 EXTENDED
Tiny Toy Gun - (x4 Round - semiauto) - EXTENDED BARREL VERSION
PREDATOR GRABBER v1
Fully 3D Printable Tiny Toy Gun - (x4 Round - semiauto) - COMPACT VERSION
Yes/No Spinner - Amor Fati - Fully 3d printable "I don't love you anymore"
Mechanical Iris Container - Compact and stackable version
.gif&w=3840&q=75)
Mechanical Creepy Eye-Ball Ring
.gif&w=3840&q=75)
Sick
I see you have the same problem with 5 like me. Any solution?
Great model!
I understand this doesn't pretend "to be" a real 6-sided dice, but the common practice is to make opposite sides have sum of 7 (1+6, 2+5, 3+4), something that could have been replicated on this model too :)
I had an idea similar to this using bearings and a different triggering mechanism. Yours is much simpler and just as effective! Way to go!
Sweet
I ended up a little to close to the bed, no chamfers on the bottom side made that problematic, as the dice outline is hardly visible in parts and the spring required some cutting.
Designers: Chamfer your first layers, goddammit!
I think I might remix this...
Hello, thank you for your feedback. The chamfer here is not feasible, especially on the spring, which has a thickness of only 0.8mm. If you print too close to the bed, you'll obviously have assembly issues. I recommend calibrating the printer properly to avoid the elephant's foot effect on the prints. Remixes are not allowed in any case.
This thing is magical. I love it. Thank you!
I’m not sure if I did something wrong but the push buttons gap seems too small for the trigger to be inserted into it. Should I not use 17.5 PLA for this print?