While for use as a game board this can also be effectively used to make a raised table or shelf for what ever your purposes are.

All parts for this model are print in place so need need for supports!

What you need:

8x M3 screws 8mm TPU feet are optional. I will be working on fittings in the future.

Recommendations:

Print Leg and Screw in PETG. Print the leg on its side. I printed all parts with 50% infill and it has very little give. Bracket screws can be a little tricky to get threading so be patient. Use a brim with 4-5 layers for the screw head for best adhesion. Print the leg on its side for best results Use a silicone lubricant to encourage easy movement of the screw