Flexi-Conda and Brick-Flexi-Conda

If you like it --> press like it :-)

Remix of my own Brick-Flexi-Gator model. https://www.printables.com/de/model/129852-brick-flexi-gator-and-flexi-gator-m81-remix

The brick studs have an diameter of 4.9mm and at the head 4.8mm. There is a fast test file to check how the bricks fit.

Works Print in Place and bricks will fit without force.

It is compatible with bricks from LEGO or similar.

The length is 220mm - the print time is arround 4h with 60mm/s - the material use arround 10m.

Recommendation: Supports: No Resolution: 0,2 Infill: 10 % Gyroid Walls: 3 Top/Bottom: 5 Layers Printed: PETG/PLA

New head available !!! You can see it on the second picture in black, red and yellow. The teeth are deleted and the contour at the eyes is changed. Also there are two holes for the nose.

License & Usage

• For private use only

Commercial License Option A commercial license is available by joining one of my Crazy3D Commercial Plans Crazy3D Commercial License + 5 Downloads per month https://thangs.com/designer/Crazy3Dde/memberships/6183/period/year Crazy3D Commercial License + 10 Downloads per month https://thangs.com/designer/Crazy3Dde/memberships/6203/period/year . The license is valid only while the membership is active and allows you to sell physical prints of my models available on Thangs. Please check the plan description for full details, conditions, and exceptions.

If you like this model, I would really appreciate a like, comment, or make.

If you enjoy my designs and my work for the community but don’t plan to sell them, you can still support me by:

☕ Buying me a coffee: https://buymeacoffee.com/crazy3d

❤️ Or joining my Crazy3D Supporter Plan - Personal use https://thangs.com/designer/Crazy3Dde/memberships/6205/period/year (donations only – no resale rights included)

Your support helps me continue creating new and exciting models for the community.