DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Colby G
ForgeCore50K followers
Follow
ForgeCore
ForgeCore
|
Image 1 of 10
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
ForgeCore
ForgeCore
|
Image 1 of 10
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips video thumbnail
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model
French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips 3d model

French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips

1.7K downloads · 2 years ago · [Instructions](https://prinnit.com/ForgeCore/design/369umeYK5OrRAbX6TRuqfL0YWMi?tab=instructions&hig
Description

Instructions Hardware Filaments

French Fry Snack Sealers - Intermediate

These French Fries clip onto your snacks to keep them fresh. There are included mounts so you can store it on the back of your pantry door using velcro command strips.

The Ketchup Cannon (please be careful with this) is a super funny way to protect your snacks. Using a 12 inch red balloon, you can shoot potential snack stealers with whatever you like. The fries are probably too hard to shoot, please use something soft like marshmallows if you're actually going to aim at people.

Tags:

Community Makes (9)
Such a quick and easy print and turned out SO cute! I used double-stick tape to put it on my fridge. LOVE IT!
AMS is NOT required - the basket only requires 3 filament swaps, so you can just set your slicer's filament change command to be "pause" and then swap the filament manually - you can do a great print like this on any printer! I used polymaker polylite pla pro white, and Cicla Antibacterial Amarillo/Rojo - just so that the snack sealers have that extra bit of sterility as they go near food.
highlight in my living room
Made some fries!
These are so fun!
I can use my favorite fastfood the keep my snacks crispy :) The fries are really sturdy. Be carefull when you shoot them with the ketchup kanon cuz it hurts :D
My ender 3 v3 se broke during this print so I wasn't able to finish it. The tolerances on my printer were really bad. Forge core is really cool I wish I could print more of his cool projects but right now I cant afford a printer. I put all my budget into the printer buying nozzles, build plates and filament
Great print! perfect for the a1 mini! Scaled the carton down to 91% to get it to fit on the a1 mini bed, other than that its perfect!
Love this new print! Can't wait to show friends!
Such a quick and easy print and turned out SO cute! I used double-stick tape to put it on my fridge. LOVE IT!
AMS is NOT required - the basket only requires 3 filament swaps, so you can just set your slicer's filament change command to be "pause" and then swap the filament manually - you can do a great print like this on any printer! I used polymaker polylite pla pro white, and Cicla Antibacterial Amarillo/Rojo - just so that the snack sealers have that extra bit of sterility as they go near food.
highlight in my living room
Made some fries!
These are so fun!
I can use my favorite fastfood the keep my snacks crispy :) The fries are really sturdy. Be carefull when you shoot them with the ketchup kanon cuz it hurts :D
My ender 3 v3 se broke during this print so I wasn't able to finish it. The tolerances on my printer were really bad. Forge core is really cool I wish I could print more of his cool projects but right now I cant afford a printer. I put all my budget into the printer buying nozzles, build plates and filament
Great print! perfect for the a1 mini! Scaled the carton down to 91% to get it to fit on the a1 mini bed, other than that its perfect!
Love this new print! Can't wait to show friends!
Community Makes (9)
Such a quick and easy print and turned out SO cute! I used double-stick tape to put it on my fridge. LOVE IT!
AMS is NOT required - the basket only requires 3 filament swaps, so you can just set your slicer's filament change command to be "pause" and then swap the filament manually - you can do a great print like this on any printer! I used polymaker polylite pla pro white, and Cicla Antibacterial Amarillo/Rojo - just so that the snack sealers have that extra bit of sterility as they go near food.
highlight in my living room
Made some fries!
These are so fun!
I can use my favorite fastfood the keep my snacks crispy :) The fries are really sturdy. Be carefull when you shoot them with the ketchup kanon cuz it hurts :D
My ender 3 v3 se broke during this print so I wasn't able to finish it. The tolerances on my printer were really bad. Forge core is really cool I wish I could print more of his cool projects but right now I cant afford a printer. I put all my budget into the printer buying nozzles, build plates and filament
Great print! perfect for the a1 mini! Scaled the carton down to 91% to get it to fit on the a1 mini bed, other than that its perfect!
Love this new print! Can't wait to show friends!
Such a quick and easy print and turned out SO cute! I used double-stick tape to put it on my fridge. LOVE IT!
AMS is NOT required - the basket only requires 3 filament swaps, so you can just set your slicer's filament change command to be "pause" and then swap the filament manually - you can do a great print like this on any printer! I used polymaker polylite pla pro white, and Cicla Antibacterial Amarillo/Rojo - just so that the snack sealers have that extra bit of sterility as they go near food.
highlight in my living room
Made some fries!
These are so fun!
I can use my favorite fastfood the keep my snacks crispy :) The fries are really sturdy. Be carefull when you shoot them with the ketchup kanon cuz it hurts :D
My ender 3 v3 se broke during this print so I wasn't able to finish it. The tolerances on my printer were really bad. Forge core is really cool I wish I could print more of his cool projects but right now I cant afford a printer. I put all my budget into the printer buying nozzles, build plates and filament
Great print! perfect for the a1 mini! Scaled the carton down to 91% to get it to fit on the a1 mini bed, other than that its perfect!
Love this new print! Can't wait to show friends!
Discussions
Henry R
Reddog772 years ago
My ender 3 v3 se broke during this print so I wasn't able to finish it. The tolerances on my printer were really bad. Forge core is really cool I wish I could print more of his cool projects but right now I cant afford a printer. I put all my budget into the printer buying nozzles, build plates and filament
My ender 3 v3 se broke during this print so I wasn't able to finish it. The tolerances on my printer were really bad. Forge core is really cool I wish I could print more of his cool projects but right now I cant afford a printer. I put all my budget into the printer buying nozzles, build plates and filament 3d model
Layer height2 mm
Infill density20 %
SupportsTree
3D P
3DPrintalot2 years ago
I can use my favorite fastfood the keep my snacks crispy :) The fries are really sturdy. Be carefull when you shoot them with the ketchup kanon cuz it hurts :D
I can use my favorite fastfood the keep my snacks crispy :) The fries are really sturdy. Be carefull when you shoot them with the ketchup kanon cuz it hurts :D 3d model
3d model
Chesnye G
chesnye2 years ago
Love this new print! Can't wait to show friends!
Love this new print! Can't wait to show friends! 3d model
Rachel B
rachelballa1 year ago
Such a quick and easy print and turned out SO cute! I used double-stick tape to put it on my fridge. LOVE IT!
Such a quick and easy print and turned out SO cute! I used double-stick tape to put it on my fridge. LOVE IT! 3d model
3d model
PrinterBambu Lab A1
MaterialPLA
C
cdodd6092 years ago
These are so fun!
These are so fun! 3d model
PrinterBambu Lab X1
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA+
Layer height0.2 mm
Infill density15 %
宇飞 丁
dyf19904112 years ago
highlight in my living room
highlight in my living room 3d model
William H
william.heimbigner2 years ago
AMS is NOT required - the basket only requires 3 filament swaps, so you can just set your slicer's filament change command to be "pause" and then swap the filament manually - you can do a great print like this on any printer! I used polymaker polylite pla pro white, and Cicla Antibacterial Amarillo/Rojo - just so that the snack sealers have that extra bit of sterility as they go near food.
AMS is NOT required - the basket only requires 3 filament swaps, so you can just set your slicer's filament change command to be "pause" and then swap the filament manually - you can do a great print like this on any printer! I used polymaker polylite pla pro white, and Cicla Antibacterial Amarillo/Rojo - just so that the snack sealers have that extra bit of sterility as they go near food. 3d model
PrinterCreality Ender 3 V3 SE
MaterialPLA+
Colby G
ForgeCore1 year ago

Look Great!

Joe K
jkokinda92 years ago
Made some fries!
Made some fries! 3d model
estuardo p
estuardo2 years ago
Great print! perfect for the a1 mini! Scaled the carton down to 91% to get it to fit on the a1 mini bed, other than that its perfect!
Great print! perfect for the a1 mini! Scaled the carton down to 91% to get it to fit on the a1 mini bed, other than that its perfect! 3d model
3d model
Greg
gpendrys2 years ago

I thought this was pretty lame at first... then I saw you could launch the fries and immediately fell in love. Going to be gifting this to some family members who ruthlessly steal snacks. Thanks for your effort!

View all 13 discussions

French Fry Snack Sealers - With Ketchup Cannon for Snack Stealers - Kitchen Clips

1.7K downloads · 2 years ago in 
Tools
 and 
Kitchen & Dining
Colby G
ForgeCore50K followers
Follow

More models

Colby G
ForgeCore
PlayBook'd - Go 3d model

PlayBook'd - Go

Colby G
ForgeCore
Telephones Booth 3d model

Telephones Booth

Colby G
ForgeCore
Spinny Succulents - Pack III 3d model

Spinny Succulents - Pack III

Colby G
ForgeCore
Desktop Golf Gen 2 3d model

Desktop Golf Gen 2

Colby G
ForgeCore
PlayBook'd - Playing Cards 3d model

PlayBook'd - Playing Cards

Colby G
ForgeCore
Desktop Dumpster 3d model

Desktop Dumpster

Colby G
ForgeCore
PlayBook'd Cribbage 3d model

PlayBook'd Cribbage

Colby G
ForgeCore
PlayBook'd Crosswords 3d model

PlayBook'd Crosswords

Colby G
ForgeCore
Snack Attack - Gen 2 3d model

Snack Attack - Gen 2

Colby G
ForgeCore
PlayBook'd Snakes and Ladders 3d model

PlayBook'd Snakes and Ladders

Colby G
ForgeCore
Date Night Daisy 3d model

Date Night Daisy

Colby G
ForgeCore
PlayBook'd Settlers' Storage 3d model

PlayBook'd Settlers' Storage

Colby G
ForgeCore
Scoopy Stacks 3d model

Scoopy Stacks

Colby G
ForgeCore
Butterfly Fridge Magnets - Pack II 3d model

Butterfly Fridge Magnets - Pack II

Colby G
ForgeCore
Playbook'd - Checkers 3d model

Playbook'd - Checkers

Colby G
ForgeCore
PlayBook'd - Shut the Box 3d model

PlayBook'd - Shut the Box

Colby G
ForgeCore
PlayBook'd - Hook and Ring.3mf 3d model

PlayBook'd - Hook and Ring.3mf

Colby G
ForgeCore
Paint Can Drying Rack 3d model

Paint Can Drying Rack

Colby G
ForgeCore
Mossy Mounds 3d model

Mossy Mounds

Colby G
ForgeCore
Playbook'd - Reversi 3d model

Playbook'd - Reversi