SWING - a mid century table lamp - large version
410 downloads · 2 years ago · Bigger version of the original SWING lamp
Illuminate your space with a touch of retro elegance in fo
Bigger version of the original SWING lamp Illuminate your space with a touch of retro elegance in form of our table lamp SWING. Perfect for adding a stylish accent to your living room, bedroom, or study, this versatile lamp combines functionality with iconic mid-century charm. Because of the semi translucent main body the emitted light can be bright and warm at the same time. additional hardware: 1x Ikea Strala or other E14 holders should work 2x M5x10 hex bolt 2x M5 hex nut 4x M4x10 hex bolt how to print: main: 1 wall only 0% infill (otherwise every rib will be filled which takes forever..) 5 bottom/top layers cap/knop: enable adaptive layer hight or set it to a low one to reduce the staircase effect shade: 0.1mm layer height
SWING - a mid century table lamp - large version
410 downloads · 2 years ago in  andÂ
Orsa - a floor lamp in scandi style
Habo floor lamp
Swing retro pendant
The Honey shelf system
Ikea Fado rumbler (25cm version)
Venio - a futuristic table lamp
Borno vase
Cibol - a table lamp
Rocket side table
Umea industrial - a floor lamp with steel/copper/aluminum pipes
Funnel vase two parts
Hobbs - a levitating desk lamp
Dego - a modern cup shelf
Needle vase - minimalistic & elegant
Needle bowl - an elegant & minimalistic bowl
Coneo - a space age housing for Ikea Fado (17cm)
Cup shelf wave
The Y Stand for IKEA Fado (17cm)
Kami - a floor lamp in boho/scandi style
Hello, the shade stl included is for the smaller version :). Could you upload the bigger size shade?
Hey, yes I just updated the model. Sorry it took so long...
Hello, I am in the middle of printing this awesome lamp! I notice that the files on this larger version say they are for the large lamp but are considerably smaller than the opening on the large main. Is there an adapter or should I scale the shades to fit?
Hi David, I put in the wrong files, I'm sorry. I just updated the model with the right files. Sorry it took so long...
Is it possible to print this in Vase mode?
Just curious is the 3mf oriented to print properly without supports for the main object? There's just a huge opening in the center that I'm worried about not holding up its shape
Is 18 hrs for the main object an expected print time? On the A1 with 0.4 nozzle and using the 0.20mm Standard @ BBL A1 system preset then override the 3 settings below brought down the time from 31 hrs to 18 hrs. It still feels pretty long so thought I'd check here before I kick it off to the printer. I also re-oriented the object so the flag side is facing the plate instead of printing on the side.
1 wall only 0% infill 5 bottom/top layers
Hi, I'm trying to add the SWING large main file to cura, but it won't load the file. Am I doing something wrong? or is the file corrupted?
Hey thanks for mentioning, seems like Bambu Studio has overwritten the file, so it worked with Bambu Studio but not Cura.. updated the file.
What size build volume for the large version?
230x230x190mm