3D MODEL DESCRIPTION I hope you enjoy this fan made deku mask from Zelda Majora's Mask!

3D PRINTING SETTINGS The mask can be printed as one solid piece or in pieces (Head, Leaves, Eye 1 and Eye 2).

Printed as one solid piece:

Layer Height: .15 Infill Density: 15% Infill Type: Gyroid Printed with Tree Support with Support Overhand Angle: 75 Width: 210.9 MM Length: 322.7 MM Height: 102.8 MM Print Time: 1 day 22 hours 21 minutes PLA: 278g

File Type: STL

You can print the eyes separately in yellow PLA and put a light behind them to get the glowing eye effect. To get a nicer fit for the eye, you can warm up the PLA with a blow dryer to get it to bend to the perfect shape for the eye and glue in on behind the mask.

https://www.tiktok.com/@stephsnerdystuff/video/7061816646406769967?is_from_webapp=1&sender_device=pc&web_id7065055736111973893