You are welcome to follow us on Instagram (sektor7_studios)

OUR NEW UPGRADE FOR THIS VERSION IS ONLINE! JUST DOWNLOAD THIS MODEL NEW AND PRINT THE NEW PARTS. YOU CAN PRINT THE RAISER WITH THE HINGE OR WITHOUT THE HINGE! USE FOR THAT OUR ADDITONAL INSTRUCTIONS

Introducing the Ultimate Lid Extension for Your Creality K1 & K1C 3D Printer! (no supports needed)

Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 & K1C 3D printer, designed to elevate your printing projects to the next level.

THIS IS VERSION 1 --> WITHOUT SWING-ARM

We have designed two different versions:

• Version 1 (this one, without SWING-ARM)
• Version 2 ( Upgraded version with SWING-ARM, for advanced users) --> https://than.gs/m/1111008

Both versions have their advantages, choose the one you like the most!

OUR STL FILES OFFERS YOU:

• Perfect Fit on Creality K1 & K1C
• Enhanced Functionality
• Improved Print Quality
• Easy Installation
• More moving space for the Bowden tube
• Air supply regulation & indirect control of the temperature
• Bowden tube passage to the back and side (you can choose)
• Detailed assembly instructions are supplied as a download
• Detailed print settings are supplied as a download

THE FOLLOWING PARTS MUST BE PRINTED:

• PART_RAISER_K1 (3 times)
• PART_BACK-RIGHT_RAISER_K1 (1 time)
• TOP-COVER_LOCK (1 times)
• SLIDER (8 times)
• CONTROLLER_WITH_LOGO (8 times) or CONTROLLER_WITHOUT_LOGO (8 times)

PRINT SETTINGS (Please read the INSTRUCTIONS and the PRINT SETTINGS)

Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary) Nozzle: 0.4mm Infill: 15% Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer height) Walls: 2 Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing) Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)

The Raiser has so far been printed on the following printers. Both could be used to print without support structures:

• K1 Max
• K1
• K1C

NOT QUITE SURE IF YOU WANT THE RAISER YET? GET AN OVERVIEW WITH OUR DETAILED MOUNTING & PRINTING INSTRUCTIONS:

• https://sektor7.studio/creality-k1-k1c-raiser-upgrade-version1/#lepopup-k1-k1c-v1-instructions

More Upgrades for the Creality K1 Series you will find here in the collection:

• https://than.gs/c/28168

Do you want to download all our Raiser versions? Or sell the printed physical products? Then use our subscription on Thangs :)

If you have any questions feel free to contact us. You can contact us under the following email:

• support@sektor7.studio

We are happy about every new follower.