Perfect for any fans of Xenomorphs, like myself. Simply add a backflow incense cone and watch as the smoke flows, recreating an iconic scene from Alien movies right in your own room.

This model is very easy to print as it needs no supports at all but it's full or details all around. It could be printed on FDM or SLA 3D Printers.

Includes: -Single color STL files. -Multicolor STL files, they are easy to paint just using the bucket tool. Just remember to turn edge detection to the maximum setting. -Pre configured 3MF Factory Files for Bambu Studio for the single color model. -Pre configured and pre-painted 3MF Factory Files for Bambu Studio for the multicolor file.

**For this project you will need: ** -Ceramic insulators measuring 6x14mm like in the pictures. Links included inside the PDF attached. -Lots of "backflow incense bullets"!

"All my models are for personal use only unless you're an active subscriber with a commercial license. Check out all my links here: ➡️ linktr.ee/ik3d"

3D PRINTING SETTINGS:

-I recommend 0.12mm layer height to show all the details. -3 Walls and 8% rectilinear infill. -I highly recommend to use PETG but I have used Silk Pla and it has been fine. -Includes 3MF files compatible with Bambu Studio