The Mighty Tiger shows itself before the Kill - Set of 3 Bookmarks
Here is the third set of bookmarks for the first week of members exclusive designs. This set is of a beautiful tiger highlighted in reds and yellows. Very strong design when printed.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest.

























You are absolutely correct, they were wrong. I have changed the description with the correct colors and values. Thanks for pointing it out.
Just wondering if the description for this model is correct. The colours do not seem to be correct for reds and orange. Cheers Chris_