I created this HueForge of the book cover Harry Potter & Prisoner of Azkaban by Olly Moss. I've released the first 3 book covers completely free! If you're interested in the other 4 fan art book covers, you can join my Thangs Membership, or they're also available in my shop. The entire set is also available for purchase as physical 3D prints on my Etsy

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 116.51x175mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Purple Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5

Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Purple At layer #14 (0.68mm) swap to White At layer #24 (1.08mm) swap to Black At layer #27 (1.2mm) swap to Savannah Yellow At layer #31 (1.36mm) swap to White At layer #39 (1.68mm) swap to Black At layer #42 (1.8mm) swap to White for the rest.