Printing recommendations. The product was made on the basis of PLA material “AURAPOL” color SILVER

The settings for ELEGOO Neptun 4 Max printer were used:

Nozzle temperature ......................................... 225С Table temperature ............................................. 60С Print layer height .............................................. 0.3 mm Line width ....................................................... 0.42 mm Number of wall lines (recommended) .......... 1-2 Number of bottom layers (ideal) ..................... 4 Filling density (sufficient) ............................... 15 %. Fill layer thickness (recommended) ............. 0.3 mm Printing speed (recommended) ............... 90 - 100 mm/s First layer speed ................................................. 60 mm Fan speed ........................................................... 20 %

Printing time was approximately .............. 2 hours Material consumption approx. ................ 51 grams / 17 meters Cost of production in the order of (max) electricity + material ............ 1.2 Euro