Explore the fascinating Mycology with this unique Morel table lamp 3D model. Inspired by the organic form of Morels that were sustainably foraged and 3D scanned to create this model. This 3D model is ideal for hobbyists and professionals looking to showcase their craftsmanship or add a touch of nature-inspired elegance to their space.

Material usage: 400 - 500 g Material: PLA that can handle the heat that your bulb emits. Print direction: stls are rotated correctly Build plate adhesion type: none, possibly a brim for the top if you have poor bed adhesion

What you need...

The two 3d printed parts A E27 (EU) or E26 (US) 40mm lamp socket kit that come with a screw-on attachment ring. You can easily get the sockets with cord and switch on Amazon, Ikea or your local hardware store. A LED bulb Light-colored or transparent filament. Versions included (more tops coming!)

Dimensions Base: 164 x 190 x 110 mm Top_1: 190 x 180 x 230 mm Top_2: 170 x 170 x 170 mm

Instructions

Gather all required parts Decide which top you want to print Print the design Insert the Socket (without bulb) from below Screw on the Ring from above into the base to secure the socket Insert the bulb Screw on the head Love your new lamp! Post a make :)

Important: You cannot use any other bulb type than LED! LEDs still give off a little heat. Depending on the strength of your bulb the design might warm up slightly. If you're using an LED bulb that emits a maximum of 50 degrees Celsius and regular PLA with a heat deflection temperature of at least 58 degrees Celsius, you should be able to safely create a product without deformation concerns. However, it's crucial to verify these specifications for the specific LED bulb and PLA material you plan to use, as variations can occur. Additionally, if you're unsure or lack experience in building electrified products, it's advisable to consult with a professional to ensure safety and proper construction.

3D PRINTING SETTINGS

Morel_Top_1 Filament 108.09m, 327g Cost: 8.19 Printing Time: 12h 19m

Morel_Top_2 Filament 90m, 273g Cost: 6.83 Printing Time: 12h

.4mm Nozzle .2mm Layer height No Supports 5% Gyroid Infill .8mm Shells

Morel_Base Filament 44m, 132g Cost: 3.30 Printing Time: 4h

.4mm Nozzle .2mm Layer height Supports Required ! 5% Gyroid Infill .8mm Shells