Adorable and funny Chicken Lamp with an egg that prints in multiparts, so anybody with a 3d printer can print this in colors!!!

Easy to print as it needs minimal supports and a fun and quick project to put together, and I have added files to also print this as a figurine and not a lamp.

Instructions:

1. For this project, you will need this USB LED lamp: -Option 1: https://www.amazon.com/dp/B08SJLGR9T

-Option 2: https://www.aliexpress.com/item/33014236775.html

2. Print the test diffuser first, as the tolerances will change from printer to printer and test if the diffuser fits nicely or you can scale it up if needed.

3. Print all the parts, only the "Face" parts needs some supports as per photos, but for some printers the body will need some too.

4.Attach and glue all the parts together, insert the USB plug through the hole, glue the LED if needed and then the diffuser and enjoy!

"All of my files are for personal use only, unless you are an active member of Thangs or Patreon with a commercial license."

3D PRINTING SETTINGS:

-Some supports needed for the "Face".

-2 Walls and 8-15% infill recommended.

-Don't forget to add a brim to support the chicken body.

-Check out the instructions on the pictures and the PDF attached with the files.