Please Chep, keep working in K1 series, I have a K1C and I can't print with the same quality as with your Ender 3 friday profiles on my first Ender 3 printer. Please, don't leave this profile in beta status, this project regards a final version. Thanks for all your work!

Thank you.

Hi thank you for the Cura profiles. Imported the K1 Max Profile .3mf and I wanted to compare print times by slicer. Cura is telling me 17 hours 26 minutes for a project and Orca is telling me less than 4 hours.Thats a huge difference. It seems the speeds are not increased for the K1 Max. Just by changing inner and outer walls speeds I was able to get it to drop from over 17 hours to over 11 hours. I guess I need to manually match the settings for a fair comparison.

This profile worked excellent for my Ender 3 V3 KE, only modification I made was to match creality's line width and added a 0.1mm horizontal expansion (reduce fusing), and Matched G-Code to Creality Print. Cura Normally shows about 2 minutes longer, but less filament overall. Creality Print just was missing the mark with customization, Cura also has the add-ins which feels essential at this point. I think Creality focused too much on look and feel rather than functionality. Thank you so much, my machine finally feels dialed in.

edit: one thing I changed is on the machine profile end GCODE as my build plate wasn't dropping after the print. removed everything and just added "END_PRINT" has been working well with my K1. I slice with cura and your profile then import the gcode into creality print for one click printing and monitoring.

Crashes Cura when I try to open it

something is wrong with the infill line width. the settings look normal, but the infill line is looking like it is 200% wide

such talent.. "said in a sarcastic tone"