Burbuja | Vase

Vase model Burbuja.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (burbuja.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and blue matte PLA)

burbuja.stl

Perla | Vase

Vase model Perla.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (perla.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of around 0.2 mm
PLA matt white or light grey)

Materia negra | Lamp

CUBE.stl

Fumarola | Vase

Vase model Fumarola.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (fumarola.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte red PLA)

Crisalida | Lamp

OLAS.stl

Tronco | Vase

Tronco vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (trunk.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and green matte PLA)

Anima | Vase

Vase model Ánima.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (anima.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte black PLA)

Uvas | Vase

Vase model Uvas.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (uvas.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and purple matte PLA)

Dama | Vase

Vase model Dama.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and PLA matte lady)

Magma | Vase

Magma vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (magma.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and black matte PLA)

Girasol | Vase

Sunflower vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (girasol.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

Caged Torch

Gracewindale-torch-supported.stl

Bench

Gracewindale-bench-cloth.stl

Fearsome Little Pumpkin

Gracewindale-pumpkin-open-75mm-supported.stl

Echo dot 3 Stand 

This unique & wonderful Eye shape holder will look great in any location. Perfect for small areas or as a small surprise in a tucked-away corner.
It transforms your Amazon Echo Dot into a stylish and functional piece of decor.  A perfect gift for yourself or any Amazon Echo Dot owner!
This custom designed, 3D printed stand holds your Amazon Echo Dot in an upright position making it easier to use and hear.   
Simply place the Amazon Echo Dot into the back and feed the cable through the hole on the bottom to connect it and you're ready to go, easy! 

Easy to print without any supports. If you like my design print it and share your makes. 
Follow me on instagram: https://www.instagram.com/b3_3dtech/

Pouf Central park, SKU. 5829 by Pikartlights

Pouf Central park, SKU. 5829 by Pikartlights
Material: steel, cloth, wood
Made in Ukraine
https://pikartlights.com/shop/fd/art5829/

Dome Pouf, SKU. 5802 by Pikartlights

Dome Pouf, SKU. 5802 by Pikartlights
Material: steel, brass, cloth, wood
Made in Ukraine
https://pikartlights.com/shop/fd/art5802/

Cari table, SKU. 18194 by Pikartlights

Cari table, SKU. 18194 by Pikartlights
Material: steel, brass
Made in Ukraine
https://pikartlights.com/shop/fd/table-central-park-art-18194/

GU mirror, SKU. 16312 by Pikartlights

GU mirror, SKU. 16312 by Pikartlights
Material: aluminum, steel, mirror
Made in Ukraine
https://pikartlights.com/shop/decor/mirrors/dzerkalo-gu-art-16312/

Digital Store
Decor

Most Downloaded of All Time

Categories

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Burbuja | Vase

Perla | Vase

Materia negra | Lamp

Fumarola | Vase

Crisalida | Lamp

Tronco | Vase

Anima | Vase

Uvas | Vase

Dama | Vase

Magma | Vase

Girasol | Vase

Caged Torch

Bench

Fearsome Little Pumpkin

Echo dot 3 Stand

Pouf Central park, SKU. 5829 by Pikartlights

Dome Pouf, SKU. 5802 by Pikartlights

Cari table, SKU. 18194 by Pikartlights

GU mirror, SKU. 16312 by Pikartlights

Water Wheel House

Digital StoreDecor

Most Downloaded of All Time

Categories

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Burbuja | Vase

Perla | Vase

Materia negra | Lamp

Fumarola | Vase

Crisalida | Lamp

Tronco | Vase

Anima | Vase

Uvas | Vase

Dama | Vase

Magma | Vase

Girasol | Vase

Caged Torch

Bench

Fearsome Little Pumpkin

Echo dot 3 Stand

Pouf Central park, SKU. 5829 by Pikartlights

Dome Pouf, SKU. 5802 by Pikartlights

Cari table, SKU. 18194 by Pikartlights

GU mirror, SKU. 16312 by Pikartlights

Water Wheel House

Digital Store
Decor