Skull Chess Set – 3D Printable Dark Fantasy Chess Pieces

Chess Set.3mf

Skull Bloom Castle STL File for 3D Print

Skrull Bloom Castle.stl

Gothic Kitsune Fox Mask Hanger - Fantasy Nature Wall Decor 3D Print

mask 1.stl

Mareep

Mareep.stl

Flexi Hulk

Hulk_Keychain.stl

Blossom Heart Dragon STL File for 3D Print

Blossom Heart Dragon.stl

Baby Velociraptor

Base.stl

Phoenix Sakura Catchall Tray

DubPhCat.3mf

Fathers Day 2026 Turtle

Hangable-FathersDay2026-RADesigns.stl

Winnie the Pooh

Winnie the Pooh2.stl

Octopus Tentacle Desk Organizer - Gothic Holder

tentacle_organizer.stl

Tetsu Hannya Wall Mask

TETSU_HANNYA_WALLMASK_PipeCox.stl

Cloyster

Cloyster.stl

Slowking

Slowking.stl

Porygon2

Porygon2_A.stl

Skullbane - Sword Cosplay Prop Kit | No Supports, No AMS, No Glue

Charcoal Black.stl

Telephones Booth

Telephones Booth.3mf

Tiki Headphone Stand - Tribal Gaming Headset Holder

Tiki Headphone Stand.stl

Stackable Bento Tray Organisers

Organiser_v1_200mm (4x4) offset doubles.STL

Koi Fish Cherry Blossom Jewelry Trinket Dish

DubKoiCat.3mf

**Frank the Frog. He will keep you from losing your pen!**
Instead of a string this design used an emotional attachment to keep you from misplacing your pen. Frank will be deeply sad if you don’t bring back his property!

The Design does not require a specific pen, the maximum diameter is 12 mm. To get a special frank pen with the flower, you will need a BIC crystal pen, the most common pen in the entire world. I personally recommend BIC fine which has a smother line than the normal ones.

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

I carefully optimized the design so that the assembly is super easy. The long and detailed instructions below contain everything step-by-step. Pease also reference the assembly video and photos!

**Printing**
- The Pen holder leans towards the left side, if you want it pointing to the right, mirror all parts in your slicer before printing.
- Single-color version only: Glue on the Eyes and refection points, pay attention to the direction or Frank will get funny side eyes, which also looks cute. Assemble the flower by glueing all three parts together.

**Before you start**
- The long end of all three shafts go towards the front. 
- The little notches on the shafts are all in the center between the gears. 
- Only one gear has a direction, it has it written on it. 
- The two smaller gears are identical. 
- Everything is friction fit and does not require glue. 
- During the assembly the rotation does not matter since you place the mouth at the end.
- Check the images and videos for visual help. 

**Assembly**
- Place the front facing down.
- Place a small gear on the longest shaft from the longer side. Insert it into the mouth hole from the back with the long side.
- Place the other small gear onto the shortest shaft from the short side. Place the normal big gear on the other side. Insert it into the, on the left-hand side of the front so the big gear interlocks with the small one on the longest shaft.
- Place the gear with the integrated stopper onto the big shaft from the short side with the written “Back” pointing outwards. Place it in the remaining hole in the front and check that the gear interlocks with the small gear on the shortest shaft. The written “Back” has to still be readable now.
- Place the two connectors in their hole
- Add the back onto the assembly
- Place the penholder onto the back
- Place the mouth on the front and align it so Frank is sad when the penholder is in its upright stage.
- Place the BIC pen core into the new pen hull. Add the flower on top.
- Place frank on his lily pad and you are done!

**Maintenance**: If the smile is not aligned anymore, you can always simply rotate the mount a bit. To maintain the gear box there is a cut at the bottom to get it open easily.

**Print settings**
Required build volume: 140 x 140 x 100 mm
Material usage: 150 g

Material: PLA
Print direction: files are rotated correctly
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15% for all parts besides the pen holder. The pen holder needs 100% infill for the balance.
Build plate adhesion type: none for all parts besides the flower, the flower needs a brim. 


Frank the frog pen holder

Back.stl

Connector.stl

Eye_white.stl

Flower_head.stl

Flower_leaf.stl

Flower_MC.stl

Flower_stem.stl

Frank_multi_color.3mf

Frank_single_color.3mf

Front_MC.stl

Front_SC.stl

Gear1.stl

Gear2.stl

Gear3.stl

Gear4.stl

Pad.stl

Pen.stl

Penholder.stl

Shaft1.stl

Shaft2.stl

Shaft3.stl

Eye_black_left.stl

Eye_black_right.stl

Mouth.stl

Video : https://www.youtube.com/shorts/6lQsLUcM0sM

This skull half mask is the perfect accessory to add a dark and elegant touch to your cosplay or costume. 

Easy to 3D print with minimal supports, it is designed to fit a standard size. 

For best results, wear it with a hood underneath and use a 25 mm elastic strap for a secure fit. 

A scary but cool mask that instantly enhances your style. 

**IMPORTANT :**

If you want to sell 3D prints from my designs or take advantage of our offers :
Please Become a [Thangs Membership](https://thangs.com/designer/BODY3D) here 

**All my Links :** https://Beacons.ai/BODY3D

Half Mask Skull

Half Mask Skull by BODY3D.stl

**A self-balancing ballon piggy bank.** 
It looks like you have a random ballon lying around and it wiggles really funny when you insert our coins.
You can simply unscrew the top when it is time to bring it to the bank.


**Instructions**
- Print the three parts
- Use the ring to screw the top and bottom together

Size assembled: 160 x 160 x 222 mm

**Print settings**
Required build volume: 170 x 170 x 170 mm
Material usage: 280 g

Material: PLA
Print direction: files are rotated correctly
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none

Ballon piggy bank, self-balancing

Balloon.3mf

A modern sculptural lampshade designed to fit a **standard E27 cord set** with screw ring.

The design consists of two parts:
- the lampshade
- the holder ring

Print with 0.8 mm nozzle in vase mode for optimal smooth results or with 0.4 mm nozzle in standard mode.

⚠️ Disclaimer

**Materials:** Always choose printing materials that are safe and suitable for use around household lighting. It is your responsibility to ensure the material is appropriate.

**Bulb type: **Use LED bulbs only. Do not use incandescent or halogen bulbs, as they produce excessive heat and may damage the print or cause a hazard.

By downloading, printing, and assembling this design, you accept full responsibility for its safe use. The designer is not liable for any damage, injury, or issues arising from the printing, assembly, or use of this model.


SLOZENA lampshade

SLOZENA lampshade.3mf

A practical planter/coaster combo that fits in with any aesthetic. The planter uses my original twist off design that reveals a hidden drip tray underneath.

------------------------------------------------------------------------------------------

**Supports**
None needed!

------------------------------------------------------------------------------------------

**Scaling**
Can be scaled however you like. Just make sure to scale everything the same.

------------------------------------------------------------------------------------------

**Orientation**
- Everything prints upright with its bottom on the build plate

------------------------------------------------------------------------------------------

**Print Settings**
- .2mm layer height
- 15% grid infill
- 2 walls

------------------------------------------------------------------------------------------

**Filament**

**[Bambu Lab Matte PLA](https://shrsl.com/4v5m0)**

Colors I used:
- Latte Brown

------------------------------------------------------------------------------------------

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Coaster Planter

Coaster Planter.stl

Pot.stl

**UPDATE: Improved joints for smoother movement, optional magnet slots (up to 3 magnets), and two joint fit versions included: regular and a looser option for printers with lower precision.**

JEWTRA is a compact jewelry travel box designed with print-in-place hinges and hidden magnets for a clean, elegant closure. The box prints unfolded to ensure reliable hinge movement and requires minimal post-processing.
Ideal for storing rings, earrings, necklaces, and small accessories - perfect for travel or everyday use.

📐 Dimensions
Final size: 107 × 104 × 30 mm
Required build plate space: 214 × 104 mm
 (The box prints unfolded due to print-in-place hinges)

🧲 Required Hardware
4× **magnets**
**Diameter: 5 mm**
**Thickness: 3 mm**
Magnet slots are integrated into the design - READ INSTRUCTIONS, please. 

JEWTRA - Jewelry Travel Compact Box I Ring box

JEWTRA travel jewelry box.3mf

Digital Store
Trending

Trending this Week

Categories

Trending

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

Skull Chess Set – 3D Printable Dark Fantasy Chess Pieces

Skull Bloom Castle STL File for 3D Print

Gothic Kitsune Fox Mask Hanger - Fantasy Nature Wall Decor 3D Print

Mareep

Flexi Hulk

Blossom Heart Dragon STL File for 3D Print

Baby Velociraptor

Phoenix Sakura Catchall Tray

Fathers Day 2026 Turtle

Winnie the Pooh

Octopus Tentacle Desk Organizer - Gothic Holder

Tetsu Hannya Wall Mask

Cloyster

Slowking

Porygon2

Skullbane - Sword Cosplay Prop Kit | No Supports, No AMS, No Glue

Telephones Booth

Tiki Headphone Stand - Tribal Gaming Headset Holder

Stackable Bento Tray Organisers

Koi Fish Cherry Blossom Jewelry Trinket Dish

Digital StoreTrending

Trending this Week

Categories

Trending

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

Skull Chess Set – 3D Printable Dark Fantasy Chess Pieces

Skull Bloom Castle STL File for 3D Print

Gothic Kitsune Fox Mask Hanger - Fantasy Nature Wall Decor 3D Print

Mareep

Flexi Hulk

Blossom Heart Dragon STL File for 3D Print

Baby Velociraptor

Phoenix Sakura Catchall Tray

Fathers Day 2026 Turtle

Winnie the Pooh

Octopus Tentacle Desk Organizer - Gothic Holder

Tetsu Hannya Wall Mask

Cloyster

Slowking

Porygon2

Skullbane - Sword Cosplay Prop Kit | No Supports, No AMS, No Glue

Telephones Booth

Tiki Headphone Stand - Tribal Gaming Headset Holder

Stackable Bento Tray Organisers

Koi Fish Cherry Blossom Jewelry Trinket Dish

Digital Store
Trending