StashHanger 2.0 – Secret Storage Hanger

StashHanger 2v00c07 200 Main Body.stl

Skeleton RattleSNEK

Cinderwing3D Skeleton RattleSNEK.stl

Lottie the Flexi Axolotl - Magnetic Hand-Holding Companion

1_FlexiAxolotl_SingleColor.3mf

Lord Beerus - Dragon Ball - Fan Art

Beerus - full.stl

Tortoise - Hatchling

CW3D Tortoise Hatchling.stl

Christmas Flexi Capybara

ChristmasFlexiCapybaraV02_01.stl

Jeff The Shark Flexi Legs -Marvel Rivals

Jeff_Flexi-KeychainHole.stl

Spinning Gear Box

coregear.stl

Twisted Planter

Twisted Wall Pot 4.stl

Flaaffy - Pokemon - Fan Art

Baby Winter Dragon

Cinderwing3D  Baby Winter Wings.stl

Zoidberg -Futurama

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt from last years Sculptober on our Patreon***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech***

Millennium Falcon Ornament - Star Wars - Christmas Day 18

falcon-top.stl

Crystalwing Tadling

crystalwing-tadling.stl

Bee - Hatchling

CW3D Bee Hatchling.stl

Flow Planter Pot by MODERN MACHINE

FLOWPLANTER.stl

Notebook stencil

Stencil_DINA4_paper.stl

Tiny Fairy Bunny

Cinderwing3D_MMU_FAIRYTinyBunny.3mf

Cow Dragon

CW3D Cow Dragon Winged.stl

Tiered Pen Holder

Tiered Pen Holder_STL.stl

**‘M for S’ Handbag – Size M – Octagon Spikes**

A medium-size 3D printed handbag featuring an octagon pattern with spikes. This size fits most standard printers with a build plate of 250×250 mm and upwards.

**No supports needed.**  
No additional hardware, stitching, or glue required for assembly.

**Includes:**  
- Lid panel  
- Front panel  
- Back panel  
- Assembly parts  
- Assembly Guide

This handbag prints directly onto power mesh (polyester–spandex blend), creating a flexible and durable structure ready for everyday use.

Other sizes are available to fit different build plates. Check my store for Small (220×220 mm) and Large (320×320 mm) options to match your printer.

**FAQ**

**Can I sell the bag?**  
Yes, with an active Commercial License. This allows you to sell the physical bag/print. Resale or sharing of the digital files is not permitted.

**What sizes are available?**  
Three versions are included based on your 3D printer build plate size:  
- Small: 220×220 mm  
- Medium: 250×250 mm  
- Large: 320×320 mm

**Do I need sewing, glue, or additional hardware?**  
No. The handbag assembles without sewing, glue, or extra hardware.

**What fabric or mesh do you use?**  
Power mesh, typically a polyester–spandex blend (about 80–92% polyester with 8–20% spandex) is ideal. Search “power mesh” online to find suitable options.

**What filament do you use?**  
The sample was printed in PLA, but PETG or ASA are also suitable.

**How long does it take to print?**  
For size M, each panel takes about 2.5 hours to print. Total print time is approximately 11 hours.

**How much filament is needed?**  
For size M, approximately 350 grams, depending on the design and slicer settings.

**License Summary:**  
Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.


M for S Handbag - Size M  - Octagon Spikey

Octagon Spikey - M Size - Hardware.stl

Octagon Spikey - M Size - Lid Panel.stl

**‘M for S’ Handbag – Size L – Octagon Spikes**

A large-size 3D printed handbag featuring an octagon pattern with spikes. This size fits most standard printers with a build plate of 320×320 mm and upwards.

**No supports needed.**  
No additional hardware, stitching, or glue required for assembly.

**Includes:**  
- Lid panel  
- Front panel  
- Back panel  
- Assembly parts  
- Assembly Guide

This handbag prints directly onto power mesh (polyester–spandex blend), creating a flexible and durable structure ready for everyday use.

Other sizes are available to fit different build plates. Check my store for Small (220×220 mm) and Medium (250×250 mm) options to match your printer.

**FAQ**

**Can I sell the bag?**  
Yes, with an active Commercial License. This allows you to sell the physical bag/print. Resale or sharing of the digital files is not permitted.

**What sizes are available?**  
Three versions are included based on your 3D printer build plate size:  
- Small: 220×220 mm  
- Medium: 250×250 mm  
- Large: 320×320 mm

**Do I need sewing, glue, or additional hardware?**  
No. The handbag assembles without sewing, glue, or extra hardware.

**What fabric or mesh do you use?**  
Power mesh, typically a polyester–spandex blend (about 80–92% polyester with 8–20% spandex) is ideal. Search “power mesh” online to find suitable options.

**What filament do you use?**  
The sample was printed in PLA, but PETG or ASA are also suitable.

**How long does it take to print?**  
For size L, each panel takes about 3 hours to print. Total print time is approximately 17 hours.

**How much filament is needed?**  
For size L, approximately 450 grams, depending on the design and slicer settings.

**License Summary:**  
Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.


M for S Handbag - Size L - Octagon Spikey

Octagon Spikey - L Size - Lid.stl

**‘M for S’ Handbag – Size S – Octagon Spikey**

A small-size 3D printed handbag featuring an octagon pattern with spikes. This size fits most standard printers with a build plate of 220×220 mm and upwards.

**No supports needed.**  
No additional hardware, stitching, or glue required for assembly.

**Includes:**  
- Lid panel  
- Front panel  
- Back panel  
- Assembly parts  
- Assembly Guide

This handbag prints directly onto power mesh (polyester–spandex blend), creating a flexible and durable structure ready for everyday use.

Other sizes are available to fit different build plates. Check my store for Medium (250×250 mm) and Large (320×320 mm) options to match your printer.

**FAQ**

**Can I sell the bag?**  
Yes, with an active Commercial License. This allows you to sell the physical bag/print. Resale or sharing of the digital files is not permitted.

**What sizes are available?**  
Three versions are included based on your 3D printer build plate size:  
- Small: 220×220 mm  
- Medium: 250×250 mm  
- Large: 320×320 mm

**Do I need sewing, glue, or additional hardware?**  
No. The handbag assembles without sewing, glue, or extra hardware.

**What fabric or mesh do you use?**  
Power mesh, typically a polyester–spandex blend (about 80–92% polyester with 8–20% spandex) is ideal. Search “power mesh” online to find suitable options.

**What filament do you use?**  
The sample was printed in PLA, but PETG or ASA are also suitable.

**How long does it take to print?**  
For size S, each panel takes about 2 hours to print. Total print time is approximately 10 hours.

**How much filament is needed?**  
For size S, approximately 275 grams, depending on the design and slicer settings.

**License Summary:**  
Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.

M for S Handbag - Size S - Octagon Spikey

Octagon Spikey - S Size - Lid.stl

Under the protection of our Relaxing Dragon Baby, there's now room for the Alexa Echo Dot 3. The unique body has been adapted so that the devices can be placed under or in front of the grand piano. It looks really cool.

Unfortunately, I couldn't make the design smaller because otherwise the head would be cut off too much. If anyone has a print bed that's too small, let me know, and I'll split the file in half for you.

Since not everyone has a need for one, we're revealing our next design for next week. It will be an articulated kangaroo with a baby. 😊

Have fun printing.

Alima Unique Designs.

--------
DISCORD ACCESS FOR ONGOING PROJECTS/NEWS

https://discord.gg/jQrF2zvxSb

AUTHORIZED SELLER BADGE - If you need the Seller Badge, please write to us

Relaxing Baby Dragon suitable for Alexa Echo Dot 3

Relaxing Dragon Alexa Echo dot 3.stl

Heart Strings - String Art Inspired 3D Printable Model

Bring together the beauty of traditional string art with the magic of 3D printing! Heart Strings is a unique decorative model that uses the natural stringing properties of filament to create delicate, interwoven strands inside a heart-shaped frame. Instead of avoiding stringing, this design embraces it to produce a stunning artistic effect.

This model is perfect for Valentine’s Day gifts, home décor, desk ornaments, or anyone who appreciates creative and experimental 3D printing techniques.

✨ Features

- Designed to utilize intentional filament stringing for artistic internal detailing
- Eye-catching heart shape with intricate woven interior
- Lightweight and fast to print
- Great conversation piece and gift idea
- Works beautifully with silk, translucent, or glossy filaments

🖨️ Printing Recommendations

- Material: PLA recommended (silk or translucent filaments look amazing)
- Layer Height: 0.12mm or 0.16mm suggested
- Supports: Not required
- Infill: 5-15%
**- Stringing Settings: Use Detect Thin Walls and a Slow Outer-Wall Speed (30mm/s)**

🎁 Perfect For
Valentine’s Day gifts
Anniversary or romantic decorations
Artistic display pieces
Testing and showcasing printer stringing characteristics

Heart Strings - String Art Model

HeartStrings_PrintStart3D.stl

Today I want to surprise you with a bonus design. Our little Tiny Arctic Baby Wolf will be making today's appearance.

After our snowy forest scene, this wolf was a must-have. The little one is also available as a keychain.

We're far from finished with Christmas designs. A few more will be online in the coming weeks.

Alima Designs

--------

DISCORD ACCESS FOR ONGOING PROJECTS/NEWS

https://discord.gg/jQrF2zvxSb

AUTHORIZED SELLER BADGE - If you need the Seller Badge, please write to us

Tiny Arctic Baby Wolf / Bonus Design / Articulated Fidget Toy

KEYCHAIN Tiny Arctic Wolf.stl

Digital Store
Most Popular

Most Popular of All Time

Categories

Popular

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

StashHanger 2.0 – Secret Storage Hanger

Skeleton RattleSNEK

Lottie the Flexi Axolotl - Magnetic Hand-Holding Companion

Lord Beerus - Dragon Ball - Fan Art

Tortoise - Hatchling

Christmas Flexi Capybara

Jeff The Shark Flexi Legs -Marvel Rivals

Spinning Gear Box

Twisted Planter

Flaaffy - Pokemon - Fan Art

Baby Winter Dragon

Zoidberg -Futurama

Millennium Falcon Ornament - Star Wars - Christmas Day 18

Crystalwing Tadling

Bee - Hatchling

Flow Planter Pot by MODERN MACHINE

Notebook stencil

Tiny Fairy Bunny

Cow Dragon

Tiered Pen Holder

Digital StoreMost Popular

Most Popular of All Time

Categories

Popular

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

StashHanger 2.0 – Secret Storage Hanger

Skeleton RattleSNEK

Lottie the Flexi Axolotl - Magnetic Hand-Holding Companion

Lord Beerus - Dragon Ball - Fan Art

Tortoise - Hatchling

Christmas Flexi Capybara

Jeff The Shark Flexi Legs -Marvel Rivals

Spinning Gear Box

Twisted Planter

Flaaffy - Pokemon - Fan Art

Baby Winter Dragon

Zoidberg -Futurama

Millennium Falcon Ornament - Star Wars - Christmas Day 18

Crystalwing Tadling

Bee - Hatchling

Flow Planter Pot by MODERN MACHINE

Notebook stencil

Tiny Fairy Bunny

Cow Dragon

Tiered Pen Holder

Digital Store
Most Popular