CBN01 – Modular Media Cabinet System (no hardware - no support)
**2026-05-08:** Update: Added center pillars (filename: B-Pillar) and display plates to hold (post/trading )cards

What if furniture is digital? Hello, let me introduce CBN01, CBN01 is a fully printed, Built from stackable segments (you need 240x220x 250 volume), this system allows you to assemble a full-size cabinet at home with just your printer, no hardware, no supports, no fixed height.

Assembly is done by building horizontal assemblies(Pillar + with extender), repeating this module, and stacking layers on top until the cabinet reaches its final form.
No screws, glue, or external fasteners are required.

Why This Exists: Most furniture is shipped, heavy, and locked into a single form.

CBN01 asks a different question: What if full-scale furniture was downloaded, printed locally, and grown over time?

To my knowledge, this is one of the first fully 3D-printed cabinet systems designed to reach true furniture dimensions using only consumer printer, without support or hardware.

Print Notes 
No supports required
Segment-based printing for reliability and scaling
Wall count can be varied per segment for structural optimization (referene = Mine is first 1/3 3 walls, 2/3 2 walls=pretty strong, glueing the first layer is a good idea if going tall)

While designed specifically to store my physical media (DVD, PlayStation games, Xbox, Switch cases), the system is equally suited for books, collectibles, or general storage. (just make sure you dont go to crazy on the weight without beefing up you print settings)

3D printed cabinet, modular cabinet system, printable furniture, media storage cabinet, DVD storage, game storage cabinet, PlayStation storage, Xbox storage, Switch game storage, stackable cabinet, no support print, PLA furniture, modular storage system, MakerWorld, functional 3D print, large scale 3D print, SMACKMAX

CBN01 – Modular Media Cabinet System (no hardware - no support)

EXTENSION.stl

PEG.stl

B PILLAR.stl

bb file 3MF.3mf

PLANK RIDGE STAND bb file 3MF.3mf

PLANK RIDGE STAND.stl

PLANK STAND.stl

ROOF B.stl

CBN01 CASESTACK v18.stl

Upgrade your workspace with this desk organizer. What sets this model apart is its unique dual-element drawer architecture: the aesthetic outer shell and the functional inner insert are printed separately. This allows for easy cleaning, color mixing, and organizing small items like screws, SD cards, and stationery in a compact, stylish footprint.

**Functionality:**
- Dual-Element Drawers: The horizontal drawers feature a removable inner tray system (shell + insert), making it easy to take small parts out to your work area without removing the whole drawer.
- Hybrid Storage: Combines shallow horizontal drawers for small bits with deep vertical bins for taller tools or pens.
- Modular Inserts: Includes varying internal layouts (4-compartment grid and 2-compartment split) to suit different storage needs.

**Design Features:**
- Soft Geometry: Features heavy fillets and rounded soft edges for a modern, approachable look.
- Ergonomic Pulls: Integrated curved finger cutouts on the drawer shells ensure a comfortable grip without needing external hardware.

**Print Instructions:**
- Supports: No supports required 
- Infill: 15%  recommended.


ModuCube | Modular Desk Storage Cube

Main_Body_Housing.stl

**A protective case for your glasses or sunglasses.**
The mechanism allows for easy one-handed usage. The inner lining is printed from TPU and the outer shell from PLA, so this design can protect your glasses well. 

While this does look complex it is actually super easy to print and make! The design does not require a multi-color printer. Single and multi-color printing models are included as STL and 3MF for all versions! They work with all current and usual multi color setups.
When you use the interlocking files, you can even print it all on one build plate!

**Sizes**
All sizes have a little wiggle room of 2 mm to X and Y direction.
- 150 x 50 x 21 mm
- 150 x 50 x 25 mm
- 150 x 50 x 30 mm
- 150 x 50 x 35 mm
- 150 x 50 x 40 mm
- 160 x 60 x 21 mm
- 160 x 60 x 25 mm
- 160 x 60 x 30 mm
- 160 x 60 x 35 mm
- 160 x 60 x 40 mm

**What you need**
- Three 10x2 mm magnets – I used N38 strength (that’s like medium) but weaker or stronger one’s work, too.
- PLA and TPU filament – I used TPU 95A, but others hardness works, too.
- Glue – normal superglue does the trick perfectly

**Instructions**
- Measure your glasses and choose your size
- Print all parts, no special settings, default will do
- Only for separate printing: Glue the TPU lining into the PLA top and bottom
- Connect the two halves by closing it down and inserting a piece of filament as hinge
- Cut the piece slightly shorter than the length of the hinge so it does not stick out. - - Push it in with another piece of filament.
- Put a bit of glue into the pin hole, add the latch and press in the pin (the pin prints sideways now to be more durable)
- Glue the first magnet into the latch
- Pay attention to the magnetization of the two magnets that you add to the top. The magnet on the left-hand side (when you lay the assembly in front of you with the bottom towards yourself, case opened) has to attract the one in the bottom. The right magnet has to repel it.
- Have a look at my videos and photos for reference if anything is unclear!


Size assembled: 163 x 71 x 27 mm 

**Print settings**
Required build volume: 170 x 170 x 30 mm
Material usage: 65 g PLA; 45 g TPU

Material: PLA and TPU
Print direction: files are rotated correctly
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none

Glasses case

150_50_25_Bottom.stl

150_50_25_Inlay.stl

150_50_25_Multi_color.3mf

150_50_25_Pin.stl

150_50_25_Single_color.3mf

150_50_25_Slider.stl

150_50_25_Top.stl

150_50_30_Bottom.stl

150_50_30_Inlay.stl

150_50_30_Multi_color.3mf

150_50_30_Pin.stl

150_50_30_Single_color.3mf

150_50_30_Slider.stl

150_50_30_Top.stl

150_50_35_Bottom.stl

150_50_35_Inlay.stl

150_50_35_Multi_color.3mf

150_50_35_Pin.stl

150_50_35_Single_color.3mf

150_50_35_Slider.stl

150_50_35_Top.stl

150_50_40_Bottom.stl

150_50_40_Inlay.stl

150_50_40_Multi_color.3mf

150_50_40_Pin.stl

150_50_40_Single_color.3mf

150_50_40_Slider.stl

150_50_40_Top.stl

150_50_21_Bottom.stl

150_50_21_Inlay.stl

150_50_21_Multi_color.3mf

150_50_21_Pin.stl

150_50_21_Single_color.3mf

150_50_21_Slider.stl

150_50_21_Top.stl

160_60_21_Bottom.stl

160_60_21_Inlay.stl

160_60_21_Multi_color.3mf

160_60_21_Pin.stl

160_60_21_Single_color.3mf

160_60_21_Slider.stl

160_60_21_Top.stl

160_60_25_Bottom.stl

160_60_25_Inlay.stl

160_60_25_Multi_color.3mf

160_60_25_Pin.stl

160_60_25_Single_color.3mf

160_60_25_Slider.stl

160_60_25_Top.stl

160_60_30_Bottom.stl

160_60_30_Inlay.stl

160_60_30_Multi_color.3mf

160_60_30_Pin.stl

160_60_30_Single_color.3mf

160_60_30_Slider.stl

160_60_30_Top.stl

160_60_35_Bottom.stl

160_60_35_Inlay.stl

160_60_35_Multi_color.3mf

160_60_35_Pin.stl

160_60_35_Single_color.3mf

160_60_35_Slider.stl

160_60_35_Top.stl

160_60_40_Bottom.stl

160_60_40_Inlay.stl

160_60_40_Multi_color.3mf

160_60_40_Pin.stl

160_60_40_Single_color.3mf

160_60_40_Slider.stl

160_60_40_Top.stl

150_50_21_Multi_color_interlocking.3mf

150_50_25_Multi_color_interlocking.3mf

150_50_30_Multi_color_interlocking.3mf

150_50_35_Multi_color_interlocking.3mf

150_50_40_Multi_color_interlocking.3mf

160_60_21_Multi_color_interlocking.3mf

160_60_25_Multi_color_interlocking.3mf

160_60_30_Multi_color_interlocking.3mf

160_60_35_Multi_color_interlocking.3mf

160_60_40_Multi_color_interlocking.3mf

Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! 
https://www.instagram.com/smackmax_/ 

Here i present my desk stand. I prefer the stand to be slanted a bit, so you can actually see what you are grabbing. It lives between my monitor and mouse-pad.

It sports the following features:
- Insert Template to configure your own holes since Its specificly designed for my use case.
- SD & Micro SD card slots
- Removable Bit Carrier
- USB Insert to accomodate USB sticks
- Wont tip over fast, due to low point of gravity
- You can print the insert at once or in 2pcs , see file browser

* Part of the Premium Library

Slant Stand (desk organizer)

Tub.stl

Organization

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

vr3x

Achievements

Voyager

Novice Maker

Organization

CBN01 – Modular Media Cabinet System (no hardware - no support)

ModuCube | Modular Desk Storage Cube

Glasses case

Slant Stand (desk organizer)