After designing the book stack deck box, I decided to see what else I could stack and turn into a deck box. Here were are with a Gameboy Cartridge Stack Deck Box.

I have provided 2 3mfs. 1 with the deck box and a separate one with labels you can print with your 3d Printer. On the Deck Box 3mf I provided a Label Template. I used this to boolean the label stls to fit to a perfect size. I think you could also use this with an exacto knife to cut out a sticker if you want to create your own.

Here is a list of the provided 3d printable labels. Sol Ring Zelda Pikachu Charizard Blastoise Venasaur Dr Mario Crash Bandicoot GTA

The 3mf has supports on the lid of the box.

Use up to 12-8mmx2mm Magnets. CA Glue to adhere them to the box.

Magnet strength- I use these magnets from Bambu. I have tried ones off amazon and its hard to figure out what the strength is going to be these bambu magnets work well for me. https://us.store.bambulab.com/products/round-magnet?id=42424856477832

Let me know what other things I should stack and turn into a deck box.