**This is a Remix  of "Bed leveling knob for JGAURORA A3 by Syumijin". **

Unfortunately Thiniverse would not let me verify my email so I couldn't add this as a Remix to his files.

This Remix was created for use with my Fokoos 3D Printer, I can't guarantee that it will work with all printers.

This is a Bed Leveling Knob for the Right side of the build plate.
The difference between the Right and Left is in which way the numbers go on the outside rim of the knobs. Right Knobs the Numbers go Clockwise, Left Counter Clockwise. 

The differences made to his files are as follows:
- Knobs diameter increased to 38mm 
- Knobs reduced to 11mm
- Center has been raised to 12.5mm so the outside edges don't run on the plate carrier.
- Center Nut Insert has been changed to an M4x10x6 Threaded Nut Insert (Press Fit).

Parts Needed: 4 M4*10*6 Threaded Press Fit Nut Inserts.

This was designed for the Fokoos Odin5 F3 Printer, but can be used with any smaller Printer such as the Creality 3 , but really they will work with any printer.  The numbering helps you to perfectly dial in manually the height of your bed. There are plenty of knobs out there, but very few are large enough to handle easily with numbers to help you count the revolutions.

Bed Leveling Knob for most 3D Printers (Right)

**This is a Remix  of "Bed leveling knob for JGAURORA A3 by Syumijin"**. 

Unfortunately, Thiniverse would not let me verify my email so I couldn't add this as a Remix to his files.

This Remix was created for use with my Fokoos 3D Printer, I can't guarantee that it will work with all printers.

This is a Bed Leveling Knob for the Left side of the build plate.
The difference between the Right and Left is in which way the numbers go on the outside rim of the knobs. Right Knobs the Numbers go Clockwise, Left Counter Clockwise. 

The differences made to his files are as follows:
- Knobs diameter increased to 38mm 
- Knobs reduced to 11mm
- Center has been raised to 12.5mm so the outside edges don't run on the plate carrier.
- Center Nut Insert has been changed to an M4x10x6 Threaded Nut Insert (Press Fit).

Parts Needed: 4 M4*10*6 Threaded Press Fit Nut Inserts.
This was designed for the Fokoos Odin5 F3 Printer, but can be used with any smaller Printer such as the Creality 3 , but really they will work with any printer.  The numbering helps you to perfectly dial in manually the height of your bed. There are plenty of knobs out there, but very few are large enough to handle easily with numbers to help you count the revolutions.

Bed Leveling Knob for most 3D Printers

Bed Leveling Knob for most 3D Printers (Left)

I am fairly new to 3D Printing. While I am excellent at building printers and repairing them, making models is something I still struggle with, thus most of my uploads will be Remixes.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

systops

Bed Leveling Knob for most 3D Printers (Right)

Bed Leveling Knob for most 3D Printers