Family friendly Halloween models that aren't too scary.

Add this cute little guy to your collection of Halloween cuties!

Feel free to join [my discord](https://discord.gg/uqJwERhbxf) for additional support, questions, or suggestions!

Cute Li'l Pumpkin

Cute Li'l Pumpkin.stl

A set of four nesting ghosts.

These guys can be printed in two colours OR printed in white and coloured in using a sharpie or similar. 
The black part of the eyes is recessed making it easy to do a neat job. Great for a family project!

If you want to print and sell my nesting ghosts or any of my other designs click 'become a member' on  my profile page and use the code 3DPB25 to get 25% off. :)

Nesting ghosts - single and multi colour print

Ghost 3.stl

Sharing a couple fun sets of bookmarks.   These will be available for @ 1 week to everyone free and then will go into the members welcome pack.  This set is of some finely dressed witches dancing under the midnight moon.  Great festive set of bookmarks to use for those spooky books.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 66.9x200mm in size
 You may print at higher layer heights below the Min Depth of 0.32mm
 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
	PLA BambuLab Basic Black Transmission Distance: 0.6
	PLA BambuLab Matte Dark Blue Transmission Distance: 1
	PLA BambuLab Basic Pink Transmission Distance: 8
	PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Dark Blue
	At layer #10 (0.88mm) swap to Pink
	At layer #16 (1.36mm) swap to Jade White for the rest.



Witches Dancing under the Halloween Moon Lit Sky - Set of Bookmarks

witchdances.3mf

Simple, support-free Cat Brooch.

It is designed to pin onto a woolen jumper, sweater or cardigan. The pin goes through the bottom of the cat and through the wool into the top of the cat. The wool creates the cat's tummy. :)

Cat Brooch - Easy print

Cat Brooch.stl

**Update October 26, 2024:** Updated pumpkin design to take less material. Added “ez” versions of the egg bottoms so it's easier to connect the eggs together.

Add this to your collection of eggs as you prepare for halloween!

Whether you're planning on using this egg to store your favorite baby dragon or putting it on display, this egg will make a great addition to your collection!

Included in the models are two different sizes of egg and top different tops.

The egg top with "flat top" in the name just indicates the egg top that is flat toward the top on the interior in order to accommodate bridging in case you want to avoid supports.

**Print Instructions:**
Required Hardware:
6 - 6x3mm magnets for the egg

Supports: Not required. However, if you want the inside of the egg to look neat toward the top you might consider adding supports.

Assembly:
I've added egg tops with separated stems for those who don't have multi-material printers. Simply glue the stem in place.

When placing the magnets, ensure the magnets placed in a way where they attract each other when closing the egg.

I've designed the magnets to be a “loose” press fit. Due to the wide variety of printers out there and the various states of tune the printers are in, I didn't want to make the tolerance too tight and make it difficult for those who haven't tuned their printers well enough. So, if your printer is well tuned, you may need to use glue to fasten the magnets.

Happy printing!

Feel free to join [my discord](https://discord.gg/uqJwERhbxf) for additional support, questions, or suggestions!

Pumpkin Egg

Top.stl

Top_flat top.stl

Bottom_ez.stl

Bottom_v2_ez.stl

Add a touch of magic to your Halloween decor with this versatile cauldron, perfect both as a decoration and for functional storage. Ideal for holding candies or as a striking centerpiece, this cauldron enhances the spooky ambiance of any setting. Print it with translucent PLA to allow for an LED light inside, casting an eerie glow that lights up the room. Whether illuminating your space or storing treats, this cauldron is an essential and enchanting addition to your Halloween celebrations.

**Print Settings**
- No brim required
- Supports required. I suggest printing with the top facing down. I used a 25-degree threshold angle with tree supports.
- 8-10% infill.
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Print Settings for Clear Translucent PLA (for bubble lights):**
- No brim required
- No support
- 0% infill
- 5 walls
- 0.4mm nozzle
- 0.2mm layer height

**Important Note:**
I used a low-temperature LED candle for the bubble light.
Please use a low-temperature LED to avoid damaging the PLA, which can melt at high temperatures. The creator assumes that users will conduct their own research to verify the suitability of the LED used and accepts no liability for any potential damages or issues.

 Halloween Cauldron: Light-Up Decor or Functional Container

pixelandpapier__cauldron__bottom.stl

Gather around the campfire with these adorable little ghosts as they roast marshmallows under the night sky! 🌙 This multi-part 3D model is designed for ease of printing—no supports needed! Perfect for a cozy Halloween decoration or a fun, spooky addition to your collection.

Each piece is optimized for single-material printing, so no AMS or multi-material setup is required. Plus, there's a special spot under the flame where you can place a tealight. Turn off the lights and watch the fire glow, adding an enchanting ambiance to your space! ✨
**NOTE: Print the fire with 0% Infill for the best lighting effect.
Print the fitment test before anything else to ensure fitment of the tea light**

Get ready to bring these cute campers to life with your 3D printer and create your own glowing campfire scene! 🎃

Glue Require - comes in multiple pieces very easy print, Just glue the parts together and add your tea light. 

Tea light used: https://a.co/d/6Sb1P3x



stldenise3d

Achievements

Novice Maker

Voyager

Seedling

Fan Favorite

Shooting Star

Halloween