Mario Question Block Container
This model is a multipart design, which means that you can print the parts in different colors to achieve a multicolor finish using just your single extruder printer.
🚨🚨🚨🚨🚨🚨
This model is for personal use only, if you want to sell physical prints of my designs, or you want to support me, please check out my patreon at: https://www.patreon.com/pressprint.
Nice design. I printed it at 200%. I found the hinge pin it be a little under sized and so the top flops around a little to much for me, so I made sleeve to go inside the bottom half to give the top half something to locate down onto. This keep the top square with the bottom then closed.
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
Nice design. I printed it at 200%. I found the hinge pin it be a little under sized and so the top flops around a little to much for me, so I made sleeve to go inside the bottom half to give the top half something to locate down onto. This keep the top square with the bottom then closed.