For anyone with more than a few personal grooming devices like tweezers and the like, this organizer holds up to 12 items in an upright fashion on a rotating holder.   

100% printed - no hardware, fasteners, or adhesives required.  No support required

How I print it:
Material = I recommend PETG but anything will work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%
Ironing = Not important.

See my blog for more details at… 
https://www.logicalplanet.com/

Commercial Licensing is available through my Thangs Memberships.

Tweezer Tower 2.0

Tweezer Tower 2 1v00a_Top.stl

It helps categorise, manage, and present content effectively, commonly found in applications.

**Parametric Model Maker:** 
I’ve created a parametric version of this model using the Parametric Model Maker, offering an even simpler way to customise the length to your needs without any 3D editing software. Give it a try here: [https://makerworld.com/en/models/59055#profileId-64529](https://makerworld.com/en/models/59055#profileId-64529).

**Suggested print settings:**
No supports are needed but follow the suggested print orientation for ideal results.
 
Additionally, take a look at my latest model: [https://thangs.com/designer/C%20Model/3d-model/Honeycomb%20Drawer%20Divider-1082639](https://thangs.com/designer/C%20Model/3d-model/Honeycomb%20Drawer%20Divider-1082639)

**Change Log:**

- 7 November 2023: Created a connector component ("Divider Board Connector-ChrisTech.stl") for linking or extending multiple divider boards ("Divider Board-ChrisTech.stl").

- 15 November 2023: Fine-tuned the tolerance in the design for the divider board("Divider Board-ChrisTech.stl").

- 21 November 2023: Upload an editable file for the divider board("Divider Board-ChrisTech.f3d"). If the current length of the divider board is insufficient, utilise the pattern feature to extend its length. Revised Connector - Version 2 ("Divider Board Connector Version 2-ChrisTech.stl").

This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike.

More designs on Printables: https://www.printables.com/@ChrisTech

Linkedin: https://www.linkedin.com/in/christopherong81/

Buy me a coffee: https://buymeacoffee.com/chrisong

Divider DIY Storage

Divider Board-ChrisTech.stl

This is a sample WallPlateMate set from my collection of WallPlateMate connectors and accessories, designed for North American-style electrical outlets and switch wall plates. I’ve created WallPlateMate plates for 1, 2, and 3-gang configurations, including rocker-style, toggle-style, classic outlet, and blank covers.

The entire collection of plates and accessories are available here...
WallPlateMate (accessories)
https://thangs.com/mythangs/collections/131788

WallPlateMate (Plates)
https://thangs.com/mythangs/collections/131287

WallPlate (Replacements)
https://thangs.com/mythangs/collections/131283

**What’s Included in This Sample Set?**

- Single-gang, single-sided, toggle switch-style WallPlateMate
- WK1 Vertical Pocket – A versatile storage accessory that holds a wallet, phone, or similar items, as well as a ball cap. It also features three hooks for keys, glasses, or other small essentials.

**What is WallPlateMate?**

WallPlateMate allows you to attach functional and storage accessories to wall switches and electrical outlets seamlessly.

For additional information and instructions, please check out my blog site…
https://www.logicalplanet.com/collections/wallplatemate/

**Compatibility & Installation**

For users with North American-style switch and outlet covers, the WallPlateMate replaces traditional covers with a modular attachment system.

For users outside North America, I’ve developed the FlexPlate, which enables the same functionality without replacing an outlet or switch cover.

WallPlateMate plates install easily using existing wall plate screws, requiring no additional holes in the wall. They can be removed at any time.

**FlexPlate Options (not included with this download)**

As part of the greater WallPlateMate collection, I also have standalone plates that can be glued onto the wall, or screwed onto the wall.  These allow the use of any WallPlateMate Accessory without attaching it to an electrical switch or outlet. 

**Print & Material Considerations**

- Print-in-place and compliant design – no assembly required.

- Accessories snap on and off easily without tools, fasteners, or adhesives.

_**⚠️Important Safety Note**
Wall plates for switches and electrical outlets are part of a flame enclosure, so it’s crucial to use a flame-retardant, self-extinguishing filament when printing parts for electrical applications.
For more information and suitable filaments, check out: 
3D Printing with Flame-Retardant Materials 
https://all3dp.com/1/3d-printing-with-flame-retardant-materials/
PETG V0 – Flame-Retardant Filament
https://www.prusa3d.com/en/product/prusament-petg-v0-jet-black-1kg Prusament 
_

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Ironing = Not required
Brim = Should not be needed 
Support = No, all required support is incorporated into the design.
Print orientation = As per the STL/3MF files.

**Related Links**

The entire collection of WallPlateMate accessories can be found here...
WallPlateMate panels:
[https://thangs.com/mythangs/collections/131287](url)
WallPlateMate Accessories:
https://thangs.com/mythangs/collections/131788

If you have not already, check out my Wall Plate collection here….
https://thangs.com/mythangs/collections/131283

**Additional Info**

Visit my blog for more details and other exciting designs: https://www.logicalplanet.com/

**Revisions and Updates**

I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.



WallPlateMate Sample Set - Single-Gang Single-Sided Toggle Switch Style with WK1 Accessory

WPM 1v00b_B11.stl

**Spoon Holder**

An extremely simple but effective design. Plus you can scale it as needed and print as many as you need. 

**Private Use Only.

Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. 
**
Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Kitchen Spoon Holder

Spoon holder.stl

Yes, there are many other designs out there, I'm using it to air dry washed cans for recycling, I only need the cans to be easily placed and removed, and not get blown off by occasional gusts of wind.

I couldn't find one that remixed the original design (https://www.thingiverse.com/thing:3944466) to fit 65mm diameter cans…

Note: You might need a brim to ensure it sticks to the bed.

*****

Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DeAZr9P

*****

Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

65mm can stacker.3mf

Here is Phone holder V2 this awesome No supports needed design is the perfect Gift for mothers day, Similar to the original it really works Amplifying your audio through the audio channels and has a channel to plug your charging cord in. Fit most phones and most chargers. Print settings, no supports needed, Nozzle size 0.4mm, Layer height 0.2mm, Print speed 100ms, Infill 20%, Infill pattern Grid, Wall count 3,

Phone holder V2

phone holder V2.stl

**Description:**
This nightstand organizer | desk organizer allows you to always have your mostly used items such as your phone, wallet, and AirPods sorted and within reach.

The implemented phone holder is ideal for use as an alarm clock, but can also contribute to simplified operation of the phone on the desk.

The design is simple and elegant, making the organizer not only practical but also an eye-catching piece.



**Print settings:**
I suggest printing this model with the following settings:

Layer height: 0.2mm
Print speed: 100-300mm/s (Start off rather slow to avoid warping issues)

(These settings are a guideline. You might want to figure out what works best for your printer/filament.)



**Assembly:**
The individual components can be plugged/pushed together. Optionally, superglue can also be used to make it more durable.



_HAVE FUN ORGANIZING!_

NIGHTSTAND ORGANIZER | DESK ORGANIZER

MDO_Assembly.stl

Useful

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

jb7322824

Achievements

Voyager