Now with two piece handles for smaller printers like Bambu A1 and Prusa Mini!
Hands down the best Nintendo Switch Grip you can print.
Print it in whatever filament you want.
Reprint if you chose TPU, that was a bad idea.
I love you.
Printed in abs using preset options. Not sure if brim option was not included or somehow removed, but first print (no brim) the larger part came free halfway though, added 0.6mm brim, not enough, knocked loose again. Was successful 3rd time with 10mm brim and 0mm spacing.
I don't think the second backplate is needed unless you handle it recklessly. So I think if you redesign it a bit and add a stop/hook where I marked with red it would be all one piece and just as good.
I got this model printed, but had about three failures on the handle model. The Brim helped 80% of the way then it looks like the weight of the handles applies enough force over time to release it from the bed.
.png&w=3840&q=85)
.png&w=256&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
Nice Print!!
I have had a few failures on this thing printing in default orientation. I normally dont have issues. May need very heavy supports.
I got this model printed, but had about three failures on the handle model. The Brim helped 80% of the way then it looks like the weight of the handles applies enough force over time to release it from the bed.