I figured out how to make it work if it doesn't at first for you. (There is probably a way easier way if you know, please say.) First, download it and open it with PrusaSlicer. Then on the top click the square with the O which should separate the parts. After that just save it and open it using Cura. (Make sure to separate the parts in Cura because they are clumped together.)
Discussions — Steam Engine V1.STEP
I figured out how to make it work if it doesn't at first for you. (There is probably a way easier way if you know, please say.) First, download it and open it with PrusaSlicer. Then on the top click the square with the O which should separate the parts. After that just save it and open it using Cura. (Make sure to separate the parts in Cura because they are clumped together.)
thank you so much, you are such a savior for beginner like me
Works perfectly!!! (Needs minimum 30 psi) Bearings : 15 x 24 x 5mm and 4 x 13 x 5mm https://www.amazon.ca/gp/product/B07JJGPFYV/ref=ewc_pr_img_1?smid=ASWK0BIJLA9BQ&psc=1 https://www.amazon.ca/gp/product/B092ZNJY76/ref=ewc_pr_img_2?smid=AXFTSW37REJR8&psc=1 Tube : 30mm acrylique tube
What screw sizes did you use? I had trouble finding the right sizes.
For those who are wondering, buy these assortments: https://www.amazon.com/dp/B076CVQZWG https://www.amazon.com/Washers-Sutemribor-Assortment-Stainless-Threaded/dp/B0CLM7XB39
how do i turn the whole model into multiple parts
You can use a CAD to split the model
30mm interior diameter tube?
26mm inner diameter, 30mm outer diameter!
sorry inner diameter*
and remember tomatoes are disgusting
in what app should I open to get the same sizes
are the cnc machined parts included?
If I load it into bambu labs software will it work right off the bat?
good question
how do you number 1 fill the screw holes number 2 seperate parts
how do i turn it into multiple parts
Can you make it into an STL file?
Muy buen aporte. Gracias
It worked flawlessly no complaint i watched all the videos and am subscriber
Awesome!!
it doesnt work for me :((
Why?
me neither
and remember tomatoes are disgusting
the og i was just waching your new vid
i am subscribed