I recently got started with Gridfinity and my first usecase was to get my go to tools in order. Since I couldn't find a bin to fit my specific label maker (Dymo Junior), I made this one. It holds the label maker upright and stores up to four cartridges in the back.

Since this was my first try at creating a custom cutout with tooltrace, the cutout ended up way wider than intended. While that held the tool in place, I wanted the result to be more snug so I fixed that with a an adapter ring. Thats the model you see in the pictures. Since you probably don't want to print a two-part-model, I created another version where I merged both parts and smoothed over some edges. Just know that what you see in the images is the two-part model. I've attached both versions, so you can choose for yourself. 

---

**This model is licensed under [CC BY-NC 4.0](https://creativecommons.org/licenses/by-nc/4.0/)**

Gridfinity Label Maker Holder for Dymo Junior 3x4

Gridfinity Dymo Junior Mod Bin.stl

Just got started with Gridfinity and figured I'd create some make up organizers. Most models I found stored things vertically, so here's my solution for fitting the essentials in a drawer. I made these by modeling my make up products in Blender and creating cutout bins with [gridfinitygenerator.com](http://gridfinitygenerator.com). And then cleaning up non-manifold edges in Blender. 

**Measurements:**

- Blush big: 2x2; fits 74mm x 74mm x 12.6mm (ca. 2.91″ × 2.91″ × 0.50″)
- Blush small: 2x2; fits 64.5mm x 64.5mm x 15.3mm  (ca. 2.54″ × 2.54″ × 0.60″)
- Powder: 2x2; fits 66.8mm x 64.9mm x 21mm (ca. 2.63″ × 2.56″ × 0.83″), fits snugly
- Foundation: 3x2; fits 106.1mm x 32.5mm x 32.5mm (ca. 4.18″ × 1.28″ × 1.28″)
- Lipstick: 3x1; fits 86.2mm x 25mm x 26mm (ca. 3.39″ × 0.98″ × 1.02″)
- Mascara: 4x1; fits 130.6mm x 18.4mm x 18.4mm (ca. 5.14″ × 0.72″ × 0.72″), with plenty of wiggle room (see picture)
- Pencils: 4x1; fits 2 pencils of 135mm x 9.1mm x 9.1mm (ca. 5.31″ × 0.36″ × 0.36″)
- Powder brush: 5x2; fits ca. 166mm x 56mm (ca. 6.54" × 2.20")
- Blush brush: 5x1; fits ca. 164mm x 39mm (ca. 6.46" × 1.54")


Due to varying bin content and attention span during creation, Z heights come in two categories. Powder, foundation and pencils are slightly higher than the others.

---

**This model is licensed under [CC BY-NC 4.0](https://creativecommons.org/licenses/by-nc/4.0/)**

Gridfinity Make Up Organizer Bins

gridfinity makeup_ender.3mf

Gridfinity

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

eikhoernken

Achievements

Seedling

Gridfinity

Gridfinity Label Maker Holder for Dymo Junior 3x4

Gridfinity Make Up Organizer Bins