[Multiboard](https://www.multiboard.io) accessory for holding Print Sheets.
Both Left Hand (insert print sheet from the left) and Right Hand (insert sheet from the right) models available in one, two or three slots. Full collection found here: [Multiboard - Print Sheet Holder](https://thangs.com/search/%22Multiboard%20-%20Print%20Sheet%20Holder%22%20creator%3A%22dizuane%22?scope=thangs&view=grid)

Uses any of the OXO, OX or OI [Rail Pop-Ins](https://www.multiboard.io/parts-library/multipoint/bin-connections) to connect to multiboard.

Credits to Jonathan (YouTube: [@Keep-Making](https://www.youtube.com/@Keep-Making), [@multiboard_io](https://www.youtube.com/@multiboard_io)) for creating multiboard/multibin/multipoint.

Made with OnShape. OnShape public document can be found here: [Multiboard - Print Sheet Holder](https://cad.onshape.com/documents/985ff51d05e771d53640097b/w/53cf2c3ceb88d05fb350ffb0/e/0922b4c29b87154839df1538).

Multiboard Print Sheet Holder - Right Hand - 3 Slot

right-hand-2-slot.stl

Multiboard **MultiBoom Arm** - Boom Arm
BOOM! There it is! Another functional part for your Multiboard - a boom arm that can connect your phones, cameras, mic, or other multiboard accessories at multiple angles!

All arms can accept Multiboard Bolts, Snaps, Threads, Hooks, shelves etc.  Piece this thing together in hundreds of combinations. Cant wait to see what you can do with this!

Included Boom Parts
**Mounting to Multiboard:**
MultiBOOM_Mount-A_Wall_T-BOLT_STRONG.stl - Print w/Supports
MultiBOOM_Mount-A_Wall.stl - Optional Push Mount (not recommended)
9 mm Small Thread, Flat Head, T-Bolt.stl
MultiBOOM_Mount-B_Swivel.stl
MultiBOOM_Mount-C_Pin.stl

**Boom Arms:**
MultiBOOM_Arm_Female_80mm.stl
MultiBOOM_Arm_Female_100mm.stl
MultiBOOM_Arm_Female_150mm.stl
MultiBOOM_Arm_Male_100mm.stl
MultiBOOM_Arm_Male-Female_100mm.stl
MultiBOOM_Arm_Male-Female_150mm.stl

MultiBOOM_Nuts.stl - Used all over your Boom to attach Arms
MultiBOOM_Mount-A_InLine-Swivel.stl


MultiBoom Arm - Multiboard Boom Arm

MultiBOOM_Arm_Male_100mm.stl

MultiBOOM_Mount-C_Pin_Short.stl

Welcome to the **MULTIVERSE**!  
Bringing together two amazing organizational systems, Multiboard and Gridfinity - easy to install, incredibly strong shelves that attach with Multiboard T-Bolts!  In 4 sizes for you to explore!

**Files Included:**
**3 Shelf Sizes: 1x2 - 2x3 - 2x4 - 2x5**
Included a T-Bolt, and MultiTool (by Keep Making for convenience)

**Multiboard Printing Guidelines:**
The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. 

This object is part of **Multiboard**, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at [https://multiboard.io](https://multiboard.io)   

Inspired by the gridfinity baseplate from Daboo.


MultiBoard Gridfinity Shelves

MultiBoard_GridfinityShelf_2x3.stl

MultiBoard_GridfinityShelf_2x4.stl

MultiBoard_GridfinityShelf_2x5.stl

Multitool.stl

9 mm Small Thread, Flat Head, T-Bolt.stl

MultiBoard_GridfinityShelf_1x2.stl

**/!\ NOTE: this mount hasn't been tested (yet) with something heavy as a monitor, only been tested with a (lightweight) Raspberry Pi /!\**

Quick remix of the Honeycomb Storage Wall Vesa 75x75 mount (https://www.printables.com/fr/model/670320-vesa-mount-75x75-hsw/files) to use with Multiboard (using the snap in method)

Multiboard Vesa Mount 75x75 With Snap for Multiboard

Multiboard Vesa Mount 75x75 Screw in.stl

Keyhole slots are on the back of a lot of wall mountable equipment.  These are a set of strong Keyhole Hangers for  for use with the [Multiboard](https://www.multiboard.io/) system.

I needed something a little stronger then just plastic pegs in the Keyholes.  These holders are strong and can hold a good amount of weight and pull down torque.

10mm length screws seem best.

It comes with Mid Thread and Big Thread mounts.
Mid Thread supports M3 and M4 screws.
Big Thread supports M4 and M5 screws.

There are Heatset inserts holders  and Screw holders

Heatset Inserts:
- M3 Heatset should be M3x6x5
- M4 Heatset should be M4x6x6
- M5 Heatset should be M5x6x7

[Heatset set from Amazon](https://a.co/d/4zJrDyb)

Blue Thread Lock will hold the Screws using the Heatset inserts into place.

Screw holders allow you to self tap a screw just by screwing it in.

Print as oriented with no supports and standard Multiboard settings (3 walls, 15% infill)

Multiboard Heavy Duty Keyhole Hanger

Multiboard Heavy Duty Keyhole Hanger - Mid Thread M4 Heatset.step

Multiboard Heavy Duty Keyhole Hanger - Mid Thread M4 Heatset.stl

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Heatset.stl

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Heatset.step

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Screw.step

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Screw.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M5 Screw.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M5 Heatset.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M4 Screw.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M4 Heatset.stl

These are pegs to allow hanging items using keyholes hangers.

They screw in small threads such as the peg holes in the multiboard.
Just align them with the keyholes by screwing or unscrewing them, you should be able to match all the spacing distances.

Using the same principle as the T-Bolts, they print flat without support so they are very sturdy.  I print them with 100% infill.

They come in multiple sizes:
- 3mm diameter & 3mm length shaft / 7mm diameter button
- 3mm diameter & 6mm length shaft / 7mm diameter button

I can generate more sizes (just ask), but these where the sizes I needed to hang a phone and a switch on my multiboard.

Multiboard Keyhole Hangers Pegs

Multiboard Keyhole Peg r3 x l6 x b7.stl

Holds my brake parts cleaner. Inside diameter is 70mm. Printed at 10% infill with tree supports.

Multiboard Spray Can Mount

Can tray (1).stl

**Version 2.1 Changes:** Updated push-fit pegs to new Multiboard standard bolt-locked inserts.  This allows you to use a [Small Thread - Lite Multipoint](https://than.gs/m/1123321) to lock in a [Heavy Weight-bearing Hook Snap](https://than.gs/m/1130430) to insure the spool holder never falls of the Multiboard tile.  I've never experienced the spool holder falling off the Multiboard, but if any of you have here is your solution.  If you don't have any issues with this, there is no need to update.

**Version 2.0 Changes:** Modified frame to take up less real estate on the Multiboard tiles.  Added some texture to the frame for aesthetics.  Roller and axles remain unchanged.

**Multiboard Mounted Spool Roller/Holder**
Spool roller for Multiboard system.  I designed this to hold spools for my Bambu XC1 that aren't compatible with the AMS.

Consists of four parts for easy of printing, and uses two 608 bearings on the axles.

Attaches to Multiboard tiles using two push-fit pegs.  You can use existing offset snaps used to mount your tiles to the wall or any other snaps.  I prefer to use the [Weight-Bearing Directional Snaps](https://than.gs/m/989145).  The push-fit pegs include small-threaded holes, so you can utilize my [remixed T-bolts ](https://than.gs/m/1052045) to secure the spool roller even more.

**Print Settings**
Use standard Multiboard print settings, 0.4mm nozzle, 0.2mm layer height, 3 walls, and 15% infill.  You can increase the main frame's infill to 30% for extra strength, but not really necessary.  Orient the parts on the print bed as shown in the 2nd photo.

**Main Frame:** Designed to be printed horizontally, like it would hanging from the Mutliboard tile.  It can be printed without supports, but I recommend using supports on the push-fit pegs to guarantee a perfect fit.

**Roller and Axles:** Print oriented vertically, no supports required.

**Assembly**
Insert the axles into the roller.  The tolerances are tight, but they should push-in with a little effort.  Slide the 608 bearings onto each axle, then the roller assembly should fit into the frame.  The bearing should snap lightly into the frame. Again, the tolerances are tight, but if everything is aligned correctly it fits together easily and rolls without resistance.

Please check out my other models here and on Makerworld.
[Multiboard AMS Shelf Brackets](https://than.gs/m/1054307)

**Remixed Multiboard T-bolts:**
- [20mm thread, with 15mm offset](https://than.gs/m/1050484)
- [13mm thread, with 15mm offset](https://than.gs/m/1052039) 
- [20mm thread, with 8mm offset](https://than.gs/m/1050483)
- [13mm thread, with 8mm offset](https://than.gs/m/1052045)




Multiboard Filament Spool Roller

Spool Holder V1.0.3mf

Holder for Vernier Caliper (digital) to use with multiboard tiles mounted vertically
no supports needed
correctly oriented for 3d printing
Remix of Push-Fits - STEP Multiboard Remixing Files by Keep Making


Digital Vernier Caliper Holder (for Multiboard)

VernierHolder.stl

Its a pencil holder I use for pens, markers and remotes.
With dividers, also keeps your pens standing at attention. 

MultiBoard Pen_, Pencil, Marker

MultiBoard-Pen_Holder.stl

Remix of the Honeycomb Storage Wall VESA 80 mount (https://www.printables.com/fr/model/343748-vesa-80-hsw-mount) with additional hole for some Switch / Access Point.

Multiboard Vesa Mount 80 With Weight Bearingh Directional Snap for Multiboard

Multiboard Vesa Mount 80.stl

This is designed to hold an aerosol can, canned air, etc. on your multiboard. It is attached via the overly strong pegboard clips and holds the cans at an angle. Two different models are provided, one with built-in support and one without if you'd like to add your own. It should be printed on the side to provide the most strength for the pegboard clips. The model is not oriented this way. The pre-supported model may have the slightest of sagging at the top of the cylinder but will print successfully on a Creality K1. To remove the supports around the pegs, use your side cutters to gently separate the supports from the pegs. It requires three horizontal pegboard spaces to clip in and is designed so you can butt them up horizontally to store multiple cans with no gaps in between (see pictures). Correct vertical spacing will have three open peg board holes between two of these holders.  There is a small triangular hole in the model for any spray nozzles your can's may have. Interior diameter is ~66mm and fits most air cans and US spray cans. There is a .STEP file in the download.

Multiboard Aerosol Can Holder Pegboard Attachment

MultiBoardCannedAir_NoSupports.stl

MultiBoardCannedAirSupports.stl

Welcome to the MULTIVERSE!

Bringing together two amazing organizational systems, Multiboard and Gridfinity - easy to install, incredibly strong shelves that attach with Multiboard T-Bolts!  In 4 sizes for you to explore!

Files Included:
**2x2 Shelf**
Included a T-Bolt, and MultiTool (by Keep Making for convenience)

Multiboard Printing Guidelines:
The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm.

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

MultiBoard Gridfinity Shelf 2x2

MultiBoard_GridfinityShelf_2x2.stl

**MultiBoard Gridfinity Shelves**
**3x4, 3x5, 2x6, 3x6**
Uses included T-bolt

I recommend using 4-6 walls and 20%+ infil

MultiBoard Gridfinity Shelves 3x4, 3x5, 2x6, 3x6

MultiBoard_GridfinityShelf_3x6.stl

MultiBoard_GridfinityShelf_3x4.stl

The Multiboard Dual Flush Cutter Holder is suitable for holding Flush Cutters, Needlenose Pliers, Wire Strippers, or other small tools.

The inner cavity measures 50mm x 15mm (~1.97" x 0.6").

Print upside down with no supports at 0.2mm layer height with three walls for optimal strength.

Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.

Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder

Multiboard Dual Flush Cutter Holder.stl

Multiboard

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

dustykuban

Achievements

Voyager