RC Heli Hold Down Clamps - 8mm Skid Tubes
3D model description Skid tube clamps for radio controlled helicopters with 8 mm landing skid tubes.
These clamps are very secure, the skid tubes "click" into the base part, which can be held down using the mounting holes. Once the skid tubes are inserted into the base, a hinged latch further secures the helicopter.
A M3x10mm socket head bolt and matching locking nut is required for the hinge.
Prints have been tested with PLA, ABS, and PETG, all work well. Recommend choosing your filament based on your needs and environment.
Recommend 4 Walls, 6 Top/Bottom Layers, and 25% Infill.
Other Sizes: 5.5mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517571 6mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517573 6.5mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517572 7mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517575 7.8mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517574 9mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517577 10mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517578 12mm: https://thangs.com/designer/dnlkdesigns/3d-model/1517579
RC Heli Hold Down Clamps - 8mm Skid Tubes
RC Heli Hold Down Clamps - 10mm Skid Tubes
RC Heli Hold Down Clamps - 9mm Skid Tubes
RC Heli Hold Down Clamps - 7.8mm Skid Tubes
RC Heli Hold Down Clamps - 7mm Skid Tubes
RC Heli Hold Down Clamps - 6.5mm Skid Tubes
RC Heli Hold Down Clamps - 6mm Skid Tubes
RC Heli Hold Down Clamps - 5.5mm Skid Tubes
RC Heli Hold Down Clamps - 12mm Skid Tubes
Magpul PMAG Gen M3 Inverted Coupler
Magpul PMAG Gen M2 Inverted Coupler
Magpul PMAG Gen M3 Floorplate Handle
Magpul PMAG Gen M2 Floorplate Handle
8mm RC Control Horn for 3D Printing
Small RC Wing Skid Protector
RC Car 1:10 Body Shell Display Chassis
Macropad for photoshop
DIY Wireless RC Head Tracker Enclosure – Arduino Nano BLE 33 Case
Mini Traffic Cone
RC Drift 1:10 Steering System with Servo
