# CHOIS Saw Guide & Saw Guide Ring - Free

A 3D-printed cutting jig for the CHOIS modular furniture system. Holds your dowel in place so you can cut cleanly every time - no clamp needed.

Two cut modes:
- 90deg / Square cut: for standard cross-cuts
- Angled cut: for leg angles when resting dowels directly on the floor without end caps

Slide your dowel into the circular channel and run your saw along the guide wall.

---

## This file includes two parts:

**saw_guide.stl**
The main jig. Holds the dowel and guides your saw.

**saw_guide_ring.stl**
A cylindrical collar that slides onto the dowel. Use it two ways:
- Mark your cut line by running a pencil along the edge of the ring
- Place it under the far end of the dowel to match the height of the Saw Guide, keeping the dowel level during cutting

---

## Compatible dowel size
Designed for 32mm dowels (snug fit).
30mm dowels also work with a slightly looser fit.

## Saw compatibility
Kerf width up to 0.8mm. The guide slot is 0.8mm - thicker saw blades can be used - the slot will widen naturally as you cut.

**Note:** A tape measure is still needed to mark your cut length before using this guide.

## Print settings
- Material: PLA or PETG
- Infill: 15% (default)
- Supports: None

---

**This file is free.**
It's a companion tool for the CHOIS modular furniture system. If you're ready to build - joints, trays, shelves, and more - the full CHOIS library is available via subscription on this profile.

**Note:** The product photo shows two colors - this is due to a filament change mid-print and has no effect on function. Print yours in any single color.

CHOIS Saw Guide & Saw Guide Ring

sawguide.stl

Woodworking

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

divaqd

Achievements

Trailblazer

Woodworking

CHOIS Saw Guide & Saw Guide Ring