RG35XX Front Buttons
324 downloads · 3 years ago · 1:1 recreations of the buttons for the face of the RG35XX handheld console. All 4 face buttons on th
1:1 recreations of the buttons for the face of the RG35XX handheld console. All 4 face buttons on the console are identical. The start and select buttons are identical. The hole in the menu button is functional for the piece to be able to make contact with the board. The injection molded versions are more accurate to the original design of the buttons, however are not necessary for the functions of the buttons.
RG35XX Side Buttons
RG35XX Shoulder Buttons
RG35XX Gameboy Color Style Buttons
RG35XX PlayStation Style Face Buttons
GAMES BOOK V2 | SWITCH, DS, 3DS, SD CARD & MICRO SD
Pokemon - Print in Place Articulating Egg in the spirit of the "Pokeball Egg" or PokeEgg
RG35XX FacePlate
Raspberry Pi 5 case - Retro tower desktop
Bundle
Not So.. XL April showers Goose, for smaller build plates, below 300x300x300
Bundle
XL April Showers Goose, for large build plates above 300x300x300mm
Bundle
Mrs Easter Bunny Not So.. XL, for smaller build plates below 300x300x300
Bundle
Not So XL Leprechaun (for smaller build plates below 300 by 300 by 300)
Bundle
Mrs Easter Bunny XL, for larger build plates above 300x300x300
Bundle
XL Leprechaun (for larger build plates above 300x300x300)
Rubber Chicken Lightsaber
EZ Print SNES Controller
.jpg&w=3840&q=75)
VW golf mk3 cupholder (updated with better fit for cans)
Wario
Cooler Master NR200 Case Top Hat Spacer
Hi, what settings should be used in the printer for the buttons? I mean the percentage of infill density and the mm of Layer Height? Also do you have the possibility to find the .stl file of the RG35XX PLUS D-pad and power button (Which is different from that of the classic RG35XX)? Thanks in advance :) I'm now approaching the world of 3D printing and I'd like to print the buttons for my RG35XX PLUS myself :)