Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4043642.

E3D Hemera + Robo3D R1(+) = #RoboHemera

Here are all of the parts you need to get started creating your very own #RoboHemera extruder. I've printed mine in Fillamentum Neon Orange Transparent CPE HG100. You can likely use whatever filament you'd like, but I'd recommend something with a high heat deflection, especially for the duct. Requires M3 and #4 screws to assemble.

All of the parts should be printed in the orientation they were provided. None of the overhangs exceed 55 degrees, so supports should not be used.

Check out my fork of Marlin 2.0.x with the required (and some personal preference) changes. Please be sure to read all the changes before blindly cloning this repository. You don't have a fancy hardware lock like those Prusa Minis to prevent you from voiding your warranty :D

https://github.com/bdtower8/Marlin/commit/f650e8a4d97096c7f7bb19da8c8dba8cbe4f0090

Recommended Upgrades

• E3D Hemera (obviously)
• 8mm rods (do this immediately)
• LM8LUU bearings
• X/Y steppers
• DRV8825 stepper drivers
• Belts and idler bearings/pulleys
• LCD + SD card reader
• Z axis steppers/leadscrew
• 40W element