 I invite you to join my Telegram group (Entries are limited - don't miss this opportunity): https://t.me/+cu1hYjl2iT9iZjI0

-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

_Thank you for visiting my page! If you can, please consider supporting my art with a [subscription](https://than.gs/u/1514642?plans=true). Members will unlock ALL of my designs as well as the commercial rights to sell physical prints for as long as they are members._

_I also invite you to join my Discord channel, whether you're a reseller or a fan. You'll find a dedicated space where you can communicate directly with me and other members:
https://discord.gg/pUW67mEFrb

-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

**YES/NO VERSION DOWNLOAD HERE: [DOWNLOAD](https://thangs.com/designer/StatusSymbol/3d-model/Yes%2FNo%20Spinner%20-%20Amor%20Fati%20-%20Fully%203d%20printable-1137104)**

- Do not change the orientation of the parts.
- I printed with PLA at 0.2mm/layer.
- Use high-quality PLA - avoid matte PLA as it is not very flexible, especially for the spring.
**- Let the parts cool down well before assembling everything – if you’re in a hurry, place them in the freezer before assembly – assembling with hot parts and stressing the spring and trigger will alter the tolerances – don’t do it. **

The Mechanical Dice is a mechanical device shaped like a pocket watch, fully 3D-printed. Its refined design evokes the classic style of a pocket watch, featuring a circular case with elegant details. At the center of the top, there is a button: when pressed, it activates an internal wheel with the faces of a standard die (numbers 1 to 6). The wheel spins as long as the button is held down and stops instantly upon release, revealing a random die face.
-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

**REMEMBER THAT ALL MY FILES ARE PROTECTED BY A CC LICENSE AND ARE NOT INTENDED FOR COMMERCIAL PURPOSES UNLESS YOU HAVE [SUBSCRIBED TO A MEMBERSHIP PLAN ON THANGS](https://than.gs/u/1514642?plans=true) - IF YOU USE MY 3D FILES FOR COMMERCIAL PURPOSES, YOU HARM MY WORK AND MY COLLABORATORS - DON'T DO IT!**

**Warning: The content in question is protected by a Creative Commons license that does not allow the creation of derivative works or remixes. This means that it is not permitted to modify, transform, or further develop the material in any form. Make sure to comply with the terms of the license to avoid copyright violations.**

-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

_How do I take such high-quality photographs?
Here's my equipment:_

_Camera: https://amzn.to/3RPDj2c_
_Lightbox: https://amzn.to/4btNvV0_ 
_Tripod: https://amzn.to/3L51fuT_

Mechanical Dice - fully 3d printable - no external parts

bottom_frame_v2.stl

trigger_v5.stl

If you liked this model and want to support me in creating more like this, consider subscribing on [Patreon](https://www.patreon.com/Keyquake)! For just $10 a month you will get:

- 3+ Models per month
- Commercial License
- Exclusive voting rights and WIP previews and more!

Flexi Toothless and Light Fury inspired by How to Train Your Dragon!

Both Keychain and regular versions are preloaded into the 3mf project file, just hide the one you don't want. For people using Prusa/Cura or other slicers that can't open the 3mf, please use the parts instead. Just drag them all (choose one of the tail parts, depending on whether you want it to be a keychain or not) into your slicer of choice and choose the option to “Load as a single object”.

All my models are designed to use 7mm jump rings or larger.



Baby Toothless and Light Fury(Articulated)

Baby Toothless - Keyquake.3mf

Baby Light Fury - Keyquake.3mf

Our incense holders are crafted to reduce the need for supports.

Each model is thoughtfully designed with built-in storage space, allowing you to conveniently store your incense sticks within the holder itself. Choose from a variety of styles to find the one that best suits your aesthetic, whether you prefer something modern, traditional, or a little more eclectic.

These incense holders are not just functional; they are a piece of art that complements any room. Print your favorite design, or collect them all to match different moods and settings.

Perfect for personal use or as a thoughtful gift.

Samurai - Incense Holder

Samurai-body.stl

Samurai-hat.stl

Samurai-lid.stl

Week 10 - The night dragon appears on fire from the reflection of the moon on its golden scales.  Everyone like dragons, right?

For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 65.03x205mm in size
 You may print at higher layer heights below the Min Depth of 0.48mm
 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
	PLA BambuLab Basic Black Transmission Distance: 0.6
	PLA BambuLab Basic Blue Transmission Distance: 4
	PLA BambuLab Basic Orange Transmission Distance: 5
	PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
	Start with Black
	At layer #7 (0.64mm) swap to Blue
	At layer #11 (0.96mm) swap to Orange
	At layer #20 (1.68mm) swap to Jade White for the rest.



The glimmering scales of the Night Dragon - Set of 3 Bookmarks

nightdragon1_Front_65x205_S_S.stl

A figure of a Nazgul from Lord of the Rings

Pre-supported .lys and .stl files for resin included.
For FDM the model needs supports to the hands.

Nazgul Figure - Lord of the Rings (Pre-Supported)

Nazgul_figure.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5321696.



Phaerimm - Tabletop Miniature

Phaerimm_01_32mm.stl


License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***


Raphael -TMNT Rubber Duckie 

R-TMNT_RubberDuck.stl

[Instructions](https://prinnit.com/ForgeCore/design/368OKOeKHepdTC2zE27IUmsF8Pr?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/368OKOeKHepdTC2zE27IUmsF8Pr?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/368OKOeKHepdTC2zE27IUmsF8Pr?section=filaments&highlight=filaments)

**Monstera Coasters** - _Beginner_    **Albo Version** - _Intermediate_

The Monstera is a super popular plant with its rather unique style of leaves. I surrounded myself with several different Monstera plants while designing this to make it as realistic as I could.

This Coaster Plant is an excellent way to store coasters, and get some more foliage into your home. Small magnets hold the leaves onto the plant, and they come off easily when you need a coaster. Snapping the leaves back onto the plant is also very satisfying!

There are a few different stem types and leaf types so you can customize your plant how you would like. 

**ForgeCore Freebie**
Check the Easy Print 3mf File for a **Freebie Snail**! A fun little articulating print that pairs well with the Monstera. Or just print on its own!

Monstera Coasters - Classic

Easy Print File - Monstera Coaster Set 3mf.3mf

Albo Leaves.stl

Dirt.stl

Leaves.stl

Pot.stl

Stems.stl

Freebie Snail.stl

An original concept of an Aztec Dragon bust.

Pre-Supported .lys and .stl files for resin included.

Aztec Dragon bust (Pre-Supported)

Aztec_Dragon.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***


Pot o' Gold -PiggyBank (+MMU 3mf)

PotOGold_PiggyBank.stl

[Instructions](https://prinnit.com/ForgeCore/design/369tf6PqVDb9dX8NJrBddZAHPe2?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/369tf6PqVDb9dX8NJrBddZAHPe2?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/369tf6PqVDb9dX8NJrBddZAHPe2?section=filaments&highlight=filaments)

**The Cactus Toothpick Holder** - _Intermediate_
This one took me soo many attempts to get working right, but its finally done!

Everyone loves cactuses. Cacti? So i made one into a toothpick holder. It has a built in spring so the spines stick out when you push it down! (If needed, use the Brim print setting to secure the spring if it isn't sticking to the build plate)

These are excellent for storing your toothpicks. They're great for when you host parties and have fruit or meat and cheese boards too!

These work with standard round toothpicks. I just picked up a pack of 500 of them for super cheap from walmart. This cactus takes 117 toothpicks total.

I used a standard 4 inch Terracotta nursery pot for mine. But I included a file to print the pot if you'd like.

Cactus Toothpick holder

Cactus.stl

Spring.stl

1 - Easy Print 3mf - Cactus Toothpick Holder.3mf

Freebie Scorpion.stl

Use the Small Hole - Click Connector to attach Multibin Panels to the Multiboard Tiles.

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Small Hole - Click Connector

Panel To Tile, Multigrid T Click.stl

This is an intricate and highly detailed 3D model of a dragon's skull for wall decoration available on thangs.com, designed by Printed Obsession. Perfect for 3D printing enthusiasts, this dragon skull wall art adds a touch of dramatic flair to any space. The model is categorized under "Art/Sculptures & Statues", making it a unique addition to any collection. For a virtual visual tour, check out the multiple high-quality images provided. Whether you're a fan of fantasy, mythology, or simply appreciate intricate artistic design, this 3D printable dragon skull wall decoration is a must-have. Printed Obsession showcases the uniqueness and expertise in designing this piece. Dive into the world of 3D art and explore the fiery aesthetics of this dragon skull on thangs.com today!

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Dragon Skull - Wall Decoration

Dragon Skull 1.stl

Monsters

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

boebash

Achievements

Novice Maker

Trailblazer