Mechanical Dice - Available Now

• Do not change the orientation of the parts.
• I printed with PLA at 0.2mm/layer.
• Use high-quality PLA - avoid matte PLA as it is not very flexible, especially for the spring. **- Let the parts cool down well before assembling everything – if you’re in a hurry, place them in the freezer before assembly – assembling with hot parts and stressing the spring and trigger will alter the tolerances – don’t do it. **

The Mechanical Dice is a mechanical device shaped like a pocket watch, fully 3D-printed. Its refined design evokes the classic style of a pocket watch, featuring a circular case with elegant details. At the center of the top, there is a button: when pressed, it activates an internal wheel with the faces of a standard die (numbers 1 to 6). The wheel spins as long as the button is held down and stops instantly upon release, revealing a random die face.

REMEMBER THAT ALL MY FILES ARE PROTECTED BY A CC LICENSE AND ARE NOT INTENDED FOR COMMERCIAL PURPOSES UNLESS YOU HAVE SUBSCRIBED TO A MEMBERSHIP PLAN ON THANGS - IF YOU USE MY 3D FILES FOR COMMERCIAL PURPOSES, YOU HARM MY WORK AND MY COLLABORATORS - DON'T DO IT!